D-Link DGS-6604 [1016/1106] Subvlan address range

D-Link DGS-6604 [1016/1106] Subvlan address range
DGS-6600 Series Switch m subvlan-address-range
CLI Reference Guide
1006
subvlan-address-range
Use subvlan-address-range command to set the IP address range of the sub
VLAN. Use the no subvlan-address-range command to remove the IP address
range of the sub VLAN.
subvlan-address-range START-IP-ADDRESS END-IP-ADDRESS
no subvlan-address-range [START-IP-ADDRESSEND-IP-ADDRESS]
Default No sub VLAN IP address range.
Command Mode VLAN configuration mode.
Usage Guideline This command is only applicable on a sub VLAN and is used to configure the IP
address range of a sub VLAN. Configuring IP address range(s) of a sub VLAN
can reduce the overhead when the switch plays ARP proxy between sub VLANs.
The wrong configuration of IP address range may cause some IP traffic cannot
be routed. For example, suppose Sub VLAN 5 is configured an IP address range,
then 10.1.1.0/24, the switch will treat all hosts in VLAN 5 are 10.1.1.0/24. In other
words, a packet received in VLAN 5 with IP address outside of this subnet will not
be routed.
A sub VLAN can have one or more IP address ranges. The configured IP
address range should not overlap with the existed address ranges of other sub
VLANs and must belong to the subnet of the super VLAN interface. Within a sub
VLAN, the configured IP address range will be merged into other range(s) if
applicable.
The no subvlan-address-range can be used to remove the IP address range
from the sub VLAN.
Example This example shows how to set the IP address range of the sub VLAN 5.
the user can verify their settings by entering show supervlan command.
Syntax Description
START-IP-ADDRESS The start IP address of this sub VLAN.
END-IP-ADDRESS The end IP address of this sub VLAN.
Switch(config)# vlan 5
Switch(config-vlan)# subvlan-address-range 192.168.10.1 192.168.10.50

Содержание

Скачать