D-Link DGS-6604 [1046/1106] Command mode

D-Link DGS-6604 [1046/1106] Command mode
DGS-6600 Series Switch m transport-address
CLI Reference Guide
1036
transport-address
Use this command to set the global transport address. Use the no form of this
command to restore the default value.
transport-address {interface | IP-ADDRESS}
no transport-address
Default Use the LSR ID as the transport-address.
Command Mode MPLS router configuration mode.
Usage Guideline This command is used to configure the LDP transport address. The transport
address is used to establish LDP TCP connection. By default, the LSR ID is used
as the transport address by all interfaces.
If the user configures the transport address to “interface”, the IP address of each
interface is used as the transport address.
If the configuration of the transport address is ti a specified IP address, this
address is used as a transport address by all interfaces.
Note 1: If LDP is running, configuring transport address will lead to LDP sessions
restart.
Note 2: If LDP is running, link-down or deleting the interface which IP address is
used as transport address will lead to the LDP session down, so suggestion
using loopback interface as transport address.
Example This example shows how to configure the transport address to 192.168.0.1.
The user can verify their settings by entering show mpls ldp parameter
command.
Syntax Description
interface Use the IP address of the corresponding interface as the transmission address
for the session on each interface.
IP-ADDRESS All sessions use this specified IP address as the transmission address uniformly.
Switch(config-mpls-router)# transport-address 192.168.0.1

Содержание

Скачать