D-Link DGS-6604 [1008/1106] Storm control level interface

D-Link DGS-6604 [1008/1106] Storm control level interface
DGS-6600 Series Switch m storm-control level (Interface)
CLI Reference Guide
998
storm-control level (Interface)
This command configures the rising threshold for Storm Control function. Use no
command to return the default settings.
storm-control {broadcast | multicast | unicast} level {LEVEL | pps PPS}
no storm-control {broadcast | multicast | unicast} level
Default level pps PPS: 131072 packets per second.
Command Mode Interface configuration.
Usage Guideline Only a physical port interface is valid for this command.
The precise suppression level, as a percentage (0 to 100) of total bandwidth of
specific port interface, is not able to be calculated exactly. That is, the current
calculation formula assumes that the packet size of all incoming packets is 1512
bytes.
Examples This example shows how to configure Broadcast storm control LEVEL by pps
mode. It assigns the pps threshold level of interface eth3.1 for incoming
broadcast packets to 500 and drops the packets that exceed the threshold.
Syntax Description
Broadcast Set Broadcast rate limiting
Multicast Set Multicast rate limiting
Unicast Set Unicast(DLF) rate limiting
level LEVEL Specifies the rising threshold as a percentage (0 to 100) of total bandwidth of the
port.
level pps PPS Specifies the rising threshold as a rate in packets per second at which traffic is
received on the port. The range of PPS is from 1 to 148810 (for 100 Mbps). For
1000 Mbps, the range is 1 to 1488100 and so on.
Switch# configure terminal
Switch(config)# interface eth3.1
Switch(config-if)# storm-control broadcast level pps 500
Switch# show storm-control interface broadcast
Interface Storm Action Type Threshold
-----------------------------------------------------
eth3.1 Broadcast Drop pps 500

Содержание

Скачать