D-Link DGS-6604 [1001/1106] Command mode

D-Link DGS-6604 [1001/1106] Command mode
DGS-6600 Series Switch m speed
CLI Reference Guide
991
speed
Use this command to configure the physical port interface speed setting.
speed {10 | 100 | 1000 [master | slave] | auto [SPEED-LIST]} [copper | fiber]
Default It will be auto for 100TX and 1000TX.
It will be fixed to 100 for 100FX.
It will be fixed to 1000 for 1000SX/LX.
Command Mode Interface configuration.
Usage Guideline Only physical port interfaces are valid for this configuration.
If the specified speed is not supported by the hardware, an error message will be
returned.
100FX is always fixed 100 and full duplex.
1000SX/LX is always fixed to 1000 and full duplex.
Syntax Description
10 Specifies to set the port speed to transmit at 10 Mbps.
100 Specifies to set the port speed to transmit at 100 Mbps.
1000 [master | slave] Specifies to set the port speed to transmit at 1000 Mbps.
copper port: If the speed is set to 1000 Mbps, then the port must be
manually set as either a master or a slave port.
fiber port (1000SX/LX): no-negotiation should be configured (i.e. auto-
negotiation disable).
master (1000 only) Manually sets a copper port to be the master port.
slave (1000 only) Manually sets a copper port to be the slave port.
SPEED-LIST A list of speeds which the switch only auto-negotiates at the specified speeds.
The speed can be 10, 100, or 1000. Use comma(,) to separate multiple speeds.
If speed list is not specified, all speeds will be advertised.
auto Specifies to determine the speed through auto-negotiation with its linked partner.
copper port: Specify to determine the speed via auto-negotiation with its
linked partner.
fiber port(1000SX/LX): auto-negotiation enable, auto-negotiation will be
started to negotiate the clock and flow control.
copper (Combo-port only) Specify that the configuration is for a copper medium.
fiber (Combo-port only) Specify that the configuration is for a fiber medium.

Содержание

Скачать