Tp-Link T1700G-28TQ V2 — настройка управления портом IEEE 802.1X для гигабитного Ethernet [130/354]

Превью страниц Страница 130 / 354

T1700G-28TQ(config)#interface gigabitEthernet 1/0/2

T1700G-28TQ(config-if)#dot1x guest-vlan

16.10 dot1x port-control

Description

The dot1x port-control command is used to configure the Control Mode of

IEEE 802.1X for the specified port. By default, the control mode is “auto”. To

restore to the default configuration, please use no dot1x port-control

command.

Syntax

dot1x port-control {auto | authorized-force | unauthorized-force}

no dot1x port-control

Parameter

auto | authorized-force | unauthorized-force —— The Control Mode for the

port.

auto:

In this mode, the port will normally work only after passing the 802.1X

Authentication.

authorized-force: In this mode, the port can work normally without passing

the 802.1X Authentication.

unauthorized-force: In this mode, the port is forbidden working for its fixed

unauthorized status.

Command Mode

Interface Configuration Mode (interface gigabitEthernet / interface range

gigabitEthernet / interface ten-gigabitEthernet / interface range

ten-gigabitEthernet)

Privilege Requirement

Only Admin, Operator and Power User level users have access to these

commands.

Example

Configure the Control Mode for Gigabit Ethernet port 1/0/20 as

“authorized-force”:

T1700G-28TQ(config)#interface gigabitEthernet 1/0/20

114