Tp-Link T1700G-28TQ V2 — настройка уровня ревизии и приоритета MST в сетевых устройствах [229/354]

Превью страниц Страница 229 / 354

Example

Configure the revision level of MST as 100:

T1700G-28TQ(config)# spanning-tree mst configuration

T1700G-28TQ(config-mst)# revision 100

26.10 spanning-tree mst instance

Description

The spanning-tree mst instance command is used to configure the priority

of MST instance. To return to the default value of MST instance priority,

please use no spanning-tree mst instance command.

Syntax

spanning-tree mst instance

instance-id

priority

pri

no spanning-tree mst instance

instance-id

priority

Parameter

instance-id

—— Instance ID, ranging from 1 to 8.

pri

—— MSTI Priority, which must be multiple of 4096 ranging from 0 to

61440. By default, it is 32768. MSTI priority is an important criterion on

determining if the switch will be chosen as the root bridge in the specific

instance.

Command Mode

Global Configuration Mode

Privilege Requirement

Only Admin, Operator and Power User level users have access to these

commands.

Example

Enable the MST Instance 1 and configure its priority as 4096:

T1700G-28TQ(config)# spanning-tree mst instance 1 priority 4096

26.11 spanning-tree mst

Description

The spanning-tree mst command is used to configure MST Instance Port. To

return to the default configuration of the corresponding Instance Port, please

use no spanning-tree mst command. A port can play different roles in

213