Tp-Link T1700G-28TQ V2 — настройка ограничения скорости DHCP Snooping для сетевых интерфейсов [95/354]

Превью страниц Страница 95 / 354

Syntax

ip dhcp snooping limit rate

value

no ip dhcp snooping limit rate

Parameter

value

—— The value of Flow Control. The options are 5/10/15/20/25/30

(packet/second). The default value is 0, which stands for “disable”.

Command Mode

Interface Configuration Mode (interface gigabitEthernet / interface range

gigabitEthernet / interface ten-gigabitEthernet / interface range

ten-gigabitEthernet)

Privilege Requirement

Only Admin, Operator and Power User level users have access to these

commands.

Example

Set the Flow Control of GigabitEthernet port 2 as 20 pps:

T1700G-28TQ(config)#interface gigabitEthernet 1/0/2

T1700G-28TQ(config-if)#ip dhcp snooping limit rate 20

11.11 ip dhcp snooping decline rate

Description

The ip dhcp snooping decline rate command is used to enable the Decline

Protect feature and configure the rate limit on DHCP Decine packets. The

excessive DHCP Decline packets will be discarded. To disable the Decline

Protect feature, please use no ip dhcp snooping decline rate command.

Syntax

ip dhcp snooping decline rate

value

no ip dhcp snooping decline rate

Parameter

value

—— Specify the rate limit of DHCP Decline packets, and the optional

values are 0, 5, 10, 15, 20, 25 and 30 (units:packet/second). It default value is

0, which stands for “disable”.