![Tp-Link T1700G-28TQ V2 — обновление резервного образа и тестирование соединения с помощью ping [156/354]](/img/pdf.png)
Tp-Link T1700G-28TQ V2 — обновление резервного образа и тестирование соединения с помощью ping [156/354]
Превью страниц
Страница 156 /
354
![Tp-Link T1700G-28TQ V2 [156/354] Syntax](/views2/1472748/page156/bg9c.png)
Example
Upgrade the switch’s backup image file with the file firmware.bin in the TFTP
server with the IP address 192.168.0.148, and reboot the switch with this
firmware:
T1700G-28TQ# firmware upgrade ip-address 192.168.0.148 filename
firmware.bin
It will only upgrade the backup image. Continue? (Y/N):y
Operation OK!
Reboot with the backup image? (Y/N): y
Upgrade the switch’s backup image file with the file firmware.bin in the TFTP
server with the IP address fe80::1234, but do not reboot the switch:
T1700G-28TQ# firmware upgrade ip-address fe80::1234 filename
firmware.bin
It will only upgrade the backup image. Continue? (Y/N):y
Operation OK!
Reboot with the backup image? (Y/N): n
18.19 ping
Description
The ping command is used to test the connectivity between the switch and
one node of the network.
Syntax
ping [ ip | ipv6 ] {
ip_addr
} [ -n
count
] [ -l
count
] [ -i
count
]
Parameter
ip —— The type of the IP address for ping test should be IPv4.
ipv6 —— The type of the IP address for ping test should be IPv6.
ip_addr
—— The IP address of the destination node for ping test. If the
parameter ip/ipv6 is not selected, both IPv4 and IPv6 addresses are
supported, for example 192.168.0.100 or fe80::1234.
-n
count
—— The amount of times to send test data during Ping testing. It
ranges from 1 to 10. By default, this value is 4.
-l
count
—— The size of the sending data during ping testing. It ranges from 1
to 1024 bytes. By default, this value is 64.
140
Содержание
2312- T1700g series switches
- Cli reference guide
- Copyright trademarks
- Preface 1
- Contents
- Chapter 4 ieee 802 q vlan commands 27
- Chapter 3 stack 23
- Chapter 2 user interface 16
- Chapter 1 using the cli 4
- Chapter 6 protocol vlan commands 36
- Chapter 5 mac based vlan commands 33
- Chapter 8 etherchannel commands 47
- Chapter 7 voice vlan commands 40
- Chapter 9 user management commands 54
- Chapter 11 binding table commands 71
- Chapter 10 http and https commands 62
- Chapter 15 ssh commands 101
- Chapter 14 system log commands 92
- Chapter 13 dos defend commands 89
- Chapter 12 arp inspection commands 83
- Chapter 18 system configuration commands 126
- Chapter 17 mac address commands 118
- Chapter 16 ieee 802 x commands 107
- Chapter 20 ethernet configuration commands 154
- Chapter 19 ipv6 address configuration commands 148
- Chapter 22 port mirror commands 177
- Chapter 21 qos commands 168
- Chapter 23 port isolation commands 180
- Chapter 25 acl commands 188
- Chapter 24 loopback detection commands 182
- Chapter 27 igmp snooping commands 226
- Chapter 26 mstp commands 206
- Chapter 28 mld snooping commands 245
- Chapter 29 snmp commands 264
- Chapter 32 static routes commands 301
- Chapter 31 arp commands 297
- Chapter 30 lldp commands 286
- Chapter 34 aaa commands 316
- Chapter 33 sdm template commands 314
- Chapter 35 dhcp relay commands 333
- Preface
- Overview of this guide
- Accessing the cli
- Logon by telnet
- Chapter 1 using the cli
- Logon by ssh
- Cli command modes
- User exec
- The following table gives detailed information about the accessing path prompt of each mode and how to exit the current mode and access the next mode
- Privileged
- Next mode
- Mode accessing path prompt
- Logout or access the
- Link aggregation and some other modes which is shown as the following diagram
- Interface configuration mode can also be divided into interface ethernet interface
- Exec mode
- Interface
- Global
- Configuration
- Next mode
- Mode accessing path prompt
- Logout or access the
- Next mode
- Mode accessing path prompt
- Logout or access the
- Interface configuration mode in this mode users can configure one or several ports
- Interface
- Global configuration mode in this mode global commands are provided such as the
- Ethernet port such as duplex mode flow control status
- Each command mode has its own set of specific commands to configure some
- Different ports corresponds to different commands
- Configuration
- Commands you should access the corresponding command mode firstly
- B interface range gigabitethernet ten gigabitethernet configure parameters for
- A interface gigabitethernet ten gigabitethernet configure parameters for an
- The user is automatically in user exec mode after the connection between the pc and the
- Switch is established by a telnet ssh connection
- Spanning tree schedule mode and so on
- Several ethernet ports
- Privilege restrictions
- Format conventions
- Conventions
- Special characters
- Parameter format
- Service password encryption
- Privilege requirement
- Example
- Enable
- Description
- Command mode
- Chapter 2 user interface
- Syntax
- Syntax
- Privilege requirement
- Parameter
- Example
- Enable password
- Description
- Command mode
- User guidelines
- Syntax
- Privilege requirement
- Parameter
- Example
- Enable secret
- Description
- Command mode
- User guidelines
- Syntax
- Privilege requirement
- Example
- Description
- Configure
- Syntax
- Privilege requirement
- Example
- Description
- Command mode
- Privilege requirement
- Example
- Description
- Command mode
- Clear history
- Syntax
- Show history
- Example
- Syntax
- Switch priority
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Chapter 3 stack
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Switch stack port
- Switch renumber
- Syntax
- Switch provision
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Show switch
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Syntax
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Chapter 4 ieee 802 q vlan commands
- Syntax
- Privilege requirement
- Parameter
- Interface vlan
- Example
- Description
- Command mode
- Command mode
- Syntax
- Switchport general allowed vlan
- Privilege requirement
- Parameter
- Example
- Description
- Syntax
- Switchport pvid
- Show vlan summary
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Description
- Command mode
- Syntax
- Show vlan brief
- Show vlan
- Privilege requirement
- Parameter
- Example
- Syntax
- Show interface switchport
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Description
- Command mode
- Chapter 5 mac based vlan commands
- Syntax
- Privilege requirement
- Parameter
- Mac vlan mac address
- Example
- Syntax
- Show mac vlan
- Privilege requirement
- Mac vlan
- Example
- Description
- Command mode
- Parameter
- Example
- Description
- Command mode
- Syntax
- Show mac vlan interface
- Privilege requirement
- Syntax
- Protocol vlan template
- Privilege requirement
- Parameter
- Description
- Command mode
- Chapter 6 protocol vlan commands
- Protocol vlan vlan
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Syntax
- Show protocol vlan template
- Protocol vlan group
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Show protocol vlan vlan
- Privilege requirement
- Example
- Description
- Command mode
- Chapter 7 voice vlan commands
- Voice vlan aging
- Voice vlan
- Syntax
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Voice vlan priority
- Syntax
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Command mode
- Voice vlan mac address
- Syntax
- Privilege requirement
- Parameter
- Example
- Description
- Syntax
- Switchport voice vlan security
- Switchport voice vlan mode
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Description
- Command mode
- Syntax
- Show voice vlan
- Privilege requirement
- Example
- Syntax
- Show voice vlan switchport
- Show voice vlan oui
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Privilege requirement
- Example
- Chapter 8 etherchannel commands
- Channel group
- Syntax
- Privilege requirement
- Parameter
- Description
- Command mode
- Syntax
- Port channel load balance
- Parameter
- Example
- Description
- Privilege requirement
- Parameter
- Lacp system priority
- Example
- Description
- Command mode
- Syntax
- Syntax
- Show etherchannel
- Privilege requirement
- Parameter
- Lacp port priority
- Example
- Description
- Command mode
- Syntax
- Show etherchannel load balance
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Show lacp sys id
- Show lacp
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Example
- User name password
- Syntax
- Parameter
- Description
- Chapter 9 user management commands
- Description
- Command mode
- User name secret
- User guidelines
- Syntax
- Privilege requirement
- Parameter
- Example
- User guidelines
- User access control ip based
- Privilege requirement
- Example
- Description
- Command mode
- Parameter
- Example
- Description
- Command mode
- User access control mac based
- Syntax
- Privilege requirement
- User access control port based
- Syntax
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Show user account list
- Privilege requirement
- Example
- Description
- Command mode
- Telnet
- Syntax
- Show user configuration
- Show telnet status
- Privilege requirement
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Example
- Command mode
- Example
- Description
- Command mode
- Chapter 10 http and https commands
- Syntax
- Privilege requirement
- Ip http server
- Syntax
- Privilege requirement
- Parameter
- Ip http session timeout
- Ip http max users
- Example
- Description
- Command mode
- Parameter
- Ip http secure server
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Syntax
- Privilege requirement
- Parameter
- Ip http secure protocol
- Ip http secure ciphersuite
- Example
- Description
- Command mode
- Privilege requirement
- Parameter
- Ip http secure max users
- Example
- Description
- Command mode
- Syntax
- Syntax
- Privilege requirement
- Parameter
- Ip http secure session timeout
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Ip http secure server download certificate
- Example
- Description
- Command mode
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Ip http secure server download key
- Example
- Description
- Syntax
- Show ip http secure server
- Show ip http configuration
- Privilege requirement
- Example
- Description
- Command mode
- Ip source binding
- Description
- Chapter 11 binding table commands
- Syntax
- Parameter
- Syntax
- Privilege requirement
- Ip dhcp snooping
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Ip dhcp snooping vlan
- Example
- Description
- Command mode
- Command mode
- Syntax
- Privilege requirement
- Ip dhcp snooping information strategy
- Ip dhcp snooping information option
- Example
- Description
- Syntax
- Privilege requirement
- Parameter
- Ip dhcp snooping information remote id
- Example
- Description
- Command mode
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Ip dhcp snooping information circuit id
- Syntax
- Privilege requirement
- Ip dhcp snooping trust
- Example
- Description
- Command mode
- Privilege requirement
- Ip dhcp snooping mac verify
- Ip dhcp snooping limit rate
- Example
- Description
- Command mode
- Syntax
- Syntax
- Privilege requirement
- Parameter
- Ip dhcp snooping decline rate
- Example
- Description
- Command mode
- Syntax
- Show ip source binding
- Privilege requirement
- Example
- Description
- Command mode
- Description
- Command mode
- Syntax
- Show ip dhcp snooping interface
- Show ip dhcp snooping
- Privilege requirement
- Parameters
- Example
- Syntax
- Show ip dhcp snooping information interface
- Privilege requirement
- Parameters
- Example
- Description
- Command mode
- Description
- Command mode
- Chapter 12 arp inspection commands
- Syntax
- Privilege requirement
- Ip arp inspection trust
- Ip arp inspection global
- Example
- Syntax
- Privilege requirement
- Ip arp inspection interface
- Example
- Description
- Command mode
- Parameter
- Ip arp inspection limit rate
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Syntax
- Show ip arp inspection
- Privilege requirement
- Ip arp inspection recover
- Example
- Description
- Command mode
- Show ip arp inspection statistics
- Show ip arp inspection interface
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Syntax
- Privilege requirement
- Example
- Description
- Command mode
- Clear ip arp inspection statistics
- Syntax
- Privilege requirement
- Ip dos prevent type
- Ip dos prevent
- Example
- Description
- Command mode
- Chapter 13 dos defend commands
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Example
- Syntax
- Show ip dos prevent
- Privilege requirement
- Example
- Description
- Command mode
- Logging buffer level
- Logging buffer
- Example
- Description
- Command mode
- Chapter 14 system log commands
- Syntax
- Privilege requirement
- Syntax
- Privilege requirement
- Parameter
- Logging file flash
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Logging file flash frequency
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Logging host index
- Logging file flash level
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Logging monitor
- Example
- Description
- Command mode
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Logging monitor level
- Example
- Description
- Syntax
- Show logging local config
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Clear logging
- Description
- Command mode
- Syntax
- Show logging loghost
- Show logging buffer
- Privilege requirement
- Parameter
- Example
- Syntax
- Show logging flash
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Description
- Command mode
- Chapter 15 ssh commands
- Syntax
- Privilege requirement
- Ip ssh version
- Ip ssh server
- Example
- Syntax
- Privilege requirement
- Parameter
- Ip ssh algorithm
- Example
- Description
- Command mode
- Ip ssh max client
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Ip ssh timeout
- Syntax
- Privilege requirement
- Parameter
- Ip ssh download
- Example
- Description
- Command mode
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Show ip ssh
- Remove public key
- Syntax
- Privilege requirement
- Example
- Dot1x system auth control
- Description
- Command mode
- Chapter 16 ieee 802 x commands
- Privilege requirement
- Example
- Dot1x handshake
- Dot1x auth method
- Description
- Command mode
- Syntax
- Syntax
- Privilege requirement
- Parameter
- Example
- Dot1x guest vlan global
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Example
- Dot1x quiet period
- Description
- Command mode
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Example
- Dot1x timeout supplicant timeout
- Description
- Syntax
- Privilege requirement
- Parameter
- Example
- Dot1x max reauth req
- Description
- Command mode
- Dot1x guest vlan interface
- Description
- Command mode
- Syntax
- Privilege requirement
- Example
- Syntax
- Privilege requirement
- Parameter
- Example
- Dot1x port control
- Description
- Command mode
- Privilege requirement
- Parameter
- Example
- Dot1x port method
- Description
- Command mode
- Syntax
- Syntax
- Show dot1x interface
- Show dot1x global
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Example
- Parameter
- Mac address table static
- Example
- Description
- Command mode
- Chapter 17 mac address commands
- Syntax
- Privilege requirement
- Syntax
- Privilege requirement
- Parameter
- Mac address table filtering
- Mac address table aging time
- Example
- Description
- Command mode
- Privilege requirement
- Parameter
- Mac address table max mac count
- Example
- Description
- Command mode
- Syntax
- Show mac address table
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Show mac address table max mac count
- Show mac address table aging time
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Command mode
- Syntax
- Show mac address table interface
- Privilege requirement
- Parameter
- Example
- Description
- Syntax
- Show mac address table count
- Show mac address table address
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Description
- Command mode
- Syntax
- Show mac address table vlan
- Privilege requirement
- Parameter
- Example
- System time ntp
- System time manual
- Syntax
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Chapter 18 system configuration commands
- Description
- Command mode
- System time dst predefined
- Syntax
- Privilege requirement
- Parameter
- Example
- System time dst date
- Syntax
- Privilege requirement
- Parameter
- Example
- Description
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- System time dst recurring
- Syntax
- Syntax
- Privilege requirement
- Parameter
- Hostname
- Example
- Description
- Command mode
- Privilege requirement
- Parameter
- Location
- Example
- Description
- Contact info
- Command mode
- Syntax
- Syntax
- Privilege requirement
- Parameter
- Ip address
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Ip address alloc
- Example
- Description
- Command mode
- Command mode
- Syntax
- Reboot
- Privilege requirement
- Parameter
- Example
- Description
- Syntax
- Privilege requirement
- Parameter
- Example
- Description
- Copy startup config tftp
- Copy running config startup config
- Command mode
- Copy tftp startup config
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Example
- Description
- Syntax
- Remove backup image
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Boot application
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Firmware upgrade
- Syntax
- Parameter
- Example
- Description
- Tracert
- Syntax
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Command mode
- Syntax
- Show system info
- Privilege requirement
- Example
- Description
- Syntax
- Show image info
- Show boot
- Privilege requirement
- Example
- Description
- Command mode
- Privilege requirement
- Example
- Description
- Command mode
- Syntax
- Show startup config
- Show running config
- Syntax
- Show system time dst
- Show system time
- Privilege requirement
- Example
- Description
- Command mode
- Show cable diagnostics interface
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Show system time ntp
- Syntax
- Show memory utilization
- Show cpu utilization
- Privilege requirement
- Example
- Description
- Command mode
- Privilege requirement
- Ipv6 enable
- Ipv6 address autoconfig
- Example
- Description
- Command mode
- Chapter 19 ipv6 address configuration commands
- Syntax
- Syntax
- Privilege requirement
- Parameter
- Ipv6 address link local
- Example
- Description
- Configuration mode
- Syntax
- Privilege requirement
- Ipv6 address ra
- Ipv6 address dhcp
- Example
- Description
- Configuration mode
- Configuration mode
- Syntax
- Privilege requirement
- Parameter
- Ipv6 address eui 64
- Example
- Description
- Syntax
- Show ipv6 interface
- Privilege requirement
- Parameter
- Ipv6 address
- Example
- Description
- Configuration mode
- Command mode
- Example
- Privilege requirement
- Syntax
- Privilege requirement
- Parameter
- Interface range gigabitethernet
- Interface gigabitethernet
- Example
- Description
- Command mode
- Chapter 20 ethernet configuration commands
- Privilege requirement
- Parameter
- Interface ten gigabitethernet
- Example
- Description
- Command mode
- User guidelines
- Syntax
- User guidelines
- Syntax
- Privilege requirement
- Parameter
- Interface range ten gigabitethernet
- Example
- Description
- Command mode
- Shutdown
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Syntax
- Privilege requirement
- Flow control
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Example
- Duplex
- Description
- Command mode
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Example
- User guidelines
- Syntax
- Storm control pps
- Storm control
- Privilege requirement
- Example
- Description
- Command mode
- Example
- Description
- Command mode
- Bandwidth
- User guidelines
- Syntax
- Privilege requirement
- Parameter
- Syntax
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Clear counters
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Show interface status
- Show interface counters
- Syntax
- Show interface configuration
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Show bandwidth
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Show storm control
- Privilege requirement
- Parameter
- Example
- Command mode
- User guidelines
- Syntax
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Chapter 21 qos commands
- Description
- Command mode
- User guidelines
- Syntax
- Qos queue cos map
- Qos dscp
- Privilege requirement
- Example
- User guidelines
- Syntax
- Qos queue dscp map
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Description
- Command mode
- User guidelines
- Syntax
- Qos queue mode
- Privilege requirement
- Parameter
- Example
- Qos queue weight
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Privilege requirement
- Parameter
- Example
- Command mode
- Syntax
- Syntax
- Show qos interface
- Show qos cos map
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Show qos queue mode
- Show qos dscp map
- Privilege requirement
- Example
- Description
- Command mode
- Syntax
- Show qos status
- Privilege requirement
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Monitor session destination interface
- Example
- Description
- Command mode
- Chapter 22 port mirror commands
- Description
- Command mode
- User guidelines
- Syntax
- Privilege requirement
- Parameter
- Monitor session source interface
- Syntax
- Show monitor session
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Example
- Description
- Command mode
- Chapter 23 port isolation commands
- Syntax
- Privilege requirement
- Port isolation
- Parameter
- Syntax
- Show port isolation interface
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Loopback detection global
- Example
- Description
- Command mode
- Chapter 24 loopback detection commands
- Syntax
- Privilege requirement
- Parameter
- Loopback detection interval
- Syntax
- Privilege requirement
- Parameter
- Loopback detection recovery time
- Example
- Description
- Command mode
- Loopback detection interface
- Loopback detection config
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Syntax
- Privilege requirement
- Loopback detection recover
- Example
- Description
- Command mode
- Show loopback detection interface
- Show loopback detection global
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Example
- Time range
- Syntax
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Chapter 25 acl commands
- Absolute
- Periodic
- Parameter
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Syntax
- Privilege requirement
- Holiday
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Holiday global
- Example
- Description
- Command mode
- Access list create
- Syntax
- Privilege requirement
- Parameter
- Mac access list
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Access list standard
- Command mode
- Access list extended
- Syntax
- Privilege requirement
- Parameter
- Description
- Syntax
- Parameter
- Example
- Description
- Access list ipv6
- User guidelines
- Syntax
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Access list policy name
- Syntax
- Redirect interface
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Access list policy action
- Command mode
- Syntax
- S condition
- Privilege requirement
- Parameter
- Example
- Description
- Syntax
- S mirror
- Qos remark
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Command mode
- Access list bind acl interface
- Syntax
- Privilege requirement
- Parameter
- Example
- Description
- Syntax
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Access list bind interface
- Access list bind acl vlan
- Description
- Command mode
- Access list bind vlan
- Syntax
- Privilege requirement
- Parameter
- Example
- Syntax
- Show access list policy
- Show access list
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Privilege requirement
- Example
- Description
- Command mode
- Syntax
- Show access list bind
- Syntax
- Parameters
- Description
- Debug spanning tree
- Command mode
- Chapter 26 mstp commands
- Syntax
- Spanning tree interface
- Spanning tree global
- Privilege requirement
- Example
- Description
- Command mode
- Command mode
- Syntax
- Spanning tree common config
- Privilege requirement
- Parameter
- Example
- Description
- Syntax
- Spanning tree mode
- Privilege requirement
- Example
- Description
- Command mode
- Parameter
- Example
- Description
- Command mode
- Syntax
- Spanning tree mst configuration
- Privilege requirement
- Syntax
- Privilege requirement
- Parameters
- Instance
- Example
- Description
- Command mode
- Revision
- Privilege requirement
- Parameters
- Example
- Description
- Command mode
- Syntax
- Syntax
- Spanning tree mst instance
- Spanning tree mst
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Spanning tree priority
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Spanning tree tc defend
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Spanning tree timer
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Description
- Command mode
- Syntax
- Spanning tree max hops
- Spanning tree hold count
- Privilege requirement
- Parameter
- Example
- Syntax
- Spanning tree bpdufilter
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Example
- Description
- Command mode
- Syntax
- Spanning tree guard loop
- Spanning tree bpduguard
- Privilege requirement
- Syntax
- Spanning tree guard root
- Privilege requirement
- Example
- Description
- Command mode
- Syntax
- Spanning tree guard tc
- Privilege requirement
- Example
- Description
- Command mode
- Syntax
- Spanning tree mcheck
- Show spanning tree active
- Privilege requirement
- Example
- Description
- Command mode
- Syntax
- Show spanning tree interface
- Show spanning tree bridge
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Command mode
- Syntax
- Show spanning tree interface security
- Privilege requirement
- Parameter
- Example
- Description
- Syntax
- Show spanning tree mst
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Description
- Command mode
- Chapter 27 igmp snooping commands
- Syntax
- Privilege requirement
- Ip igmp snooping interface
- Ip igmp snooping global
- Example
- Syntax
- Privilege requirement
- Parameter
- Ip igmp snooping rtime
- Example
- Description
- Command mode
- Ip igmp snooping mtime
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Ip igmp snooping report suppression
- Syntax
- Privilege requirement
- Ip igmp snooping immediate leave
- Ip igmp snooping drop unknown
- Example
- Description
- Command mode
- Parameter
- Ip igmp snooping last listener query inteval
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Syntax
- Privilege requirement
- Parameter
- Ip igmp snooping vlan config
- Ip igmp snooping last listener query count
- Example
- Description
- Command mode
- Privilege requirement
- Parameter
- Example
- Command mode
- Ip igmp snooping multi vlan config
- Description
- Syntax
- Parameter
- Syntax
- Privilege requirement
- Parameter
- Ip igmp snooping querier vlan
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Ip igmp snooping querier vlan general query
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Ip igmp snooping max groups
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Ip igmp profile
- Example
- Description
- Command mode
- Description
- Command mode
- Syntax
- Privilege requirement
- Permit
- Example
- Syntax
- Privilege requirement
- Parameter
- Ip igmp filter
- Example
- Description
- Command mode
- Privilege requirement
- Example
- Description
- Command mode
- Clear ip igmp snooping statistics
- Syntax
- Show ip igmp snooping
- Syntax
- Show ip igmp snooping vlan
- Show ip igmp snooping interface
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Show ip igmp snooping groups
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Show ip igmp snooping multi vlan
- Syntax
- Privilege requirement
- Parameter
- Example
- Command mode
- Syntax
- Show ip igmp snooping querier
- Show ip igmp profile
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Chapter 28 mld snooping commands
- Syntax
- Privilege requirement
- Ipv6 mld snooping interface
- Ipv6 mld snooping global
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Ipv6 mld snooping rtime
- Example
- Description
- Command mode
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Ipv6 mld snooping report suppression
- Ipv6 mld snooping mtime
- Example
- Syntax
- Privilege requirement
- Ipv6 mld snooping immediate leave
- Ipv6 mld snooping drop unknown
- Example
- Description
- Command mode
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Ipv6 mld snooping last listener query inteval
- Ipv6 mld snooping last listener query count
- Syntax
- Privilege requirement
- Parameter
- Ipv6 mld snooping vlan config
- Example
- Description
- Command mode
- Privilege requirement
- Parameter
- Example
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Ipv6 mld snooping multi vlan config
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Ipv6 mld snooping querier vlan general query
- Ipv6 mld snooping querier vlan general
- Ipv6 mld snooping querier vlan
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Ipv6 mld snooping max groups
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Example
- Command mode
- Ipv6 mld profile
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Syntax
- Privilege requirement
- Permit
- Parameter
- Example
- Description
- Command mode
- Privilege requirement
- Parameter
- Ipv6 mld filter
- Example
- Description
- Command mode
- Syntax
- Syntax
- Show ipv6 mld snooping interface
- Show ipv6 mld snooping
- Privilege requirement
- Example
- Description
- Command mode
- Clear ipv6 mld snooping statistics
- Syntax
- Show ipv6 mld snooping vlan
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Show ipv6 mld snooping multi vlan
- Show ipv6 mld snooping groups
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Show ipv6 mld snooping querier
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Command mode
- Syntax
- Show ipv6 mld profile
- Privilege requirement
- Parameter
- Example
- Description
- Syntax
- Snmp server view
- Snmp server
- Privilege requirement
- Example
- Description
- Command mode
- Chapter 29 snmp commands
- Description
- Command mode
- Syntax
- Snmp server group
- Privilege requirement
- Parameter
- Example
- Privilege requirement
- Parameter
- Example
- Command mode
- Syntax
- Snmp server user
- Parameter
- Description
- Example
- Description
- Command mode
- Syntax
- Snmp server community
- Privilege requirement
- Parameter
- Syntax
- Snmp server host
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Privilege requirement
- Example
- Command mode
- Description
- Command mode
- Syntax
- Snmp server traps snmp
- Snmp server engineid
- Privilege requirement
- Parameter
- Example
- Syntax
- Snmp server traps link status
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Example
- Description
- Command mode
- Syntax
- Snmp server traps
- Privilege requirement
- Parameter
- Syntax
- Snmp server traps mac
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Snmp server traps vlan
- Syntax
- Rmon history
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Rmon event
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Rmon alarm
- Parameter
- Description
- Syntax
- Rmon statistics
- Privilege requirement
- Example
- Description
- Command mode
- Show snmp server
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Syntax
- Show snmp server view
- Show snmp server user
- Show snmp server group
- Privilege requirement
- Example
- Description
- Command mode
- Syntax
- Show snmp server host
- Show snmp server community
- Privilege requirement
- Example
- Description
- Command mode
- Syntax
- Show snmp server engineid
- Show rmon history
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Show rmon event
- Show rmon alarm
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Show rmon statistics
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Lldp hold multiplier
- Example
- Description
- Command mode
- Chapter 30 lldp commands
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Lldp timer
- Example
- Syntax
- Privilege requirement
- Lldp receive
- Example
- Description
- Command mode
- Lldp transmit
- Lldp snmp trap
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Syntax
- Privilege requirement
- Lldp tlv select
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Lldp med status
- Lldp med fast count
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Lldp med tlv select
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Lldp med location
- Example
- Description
- Command mode
- Example
- Description
- Command mode
- Syntax
- Show lldp interface
- Show lldp
- Privilege requirement
- Parameters
- Syntax
- Show lldp neighbor information interface
- Show lldp local information interface
- Privilege requirement
- Parameters
- Example
- Description
- Command mode
- Example
- Description
- Command mode
- Syntax
- Show lldp traffic interface
- Privilege requirement
- Parameters
- Syntax
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Chapter 31 arp commands
- Example
- Description
- Command mode
- Clear arp cache
- Arp timeout
- Syntax
- Privilege requirement
- Parameter
- Syntax
- Show ip arp interface
- Show arp
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Show ip arp summary
- Syntax
- Privilege requirement
- Parameter
- Interface vlan
- Interface loopback
- Example
- Description
- Command mode
- Chapter 32 static routes commands
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Syntax
- Switchport
- Syntax
- Privilege requirement
- Parameter
- Interface range port channel
- Interface port channel
- Example
- Description
- Command mode
- Syntax
- Shutdown
- Privilege requirement
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Ip route
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Ipv6 routing
- Example
- Description
- Command mode
- Description
- Command mode
- Syntax
- Show interface vlan
- Privilege requirement
- Parameter
- Ipv6 route
- Example
- Syntax
- Show ip interface
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Example
- Description
- Command mode
- Syntax
- Show ip route
- Show ip interface brief
- Privilege requirement
- Parameter
- Syntax
- Show ip route specify
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Privilege requirement
- Example
- Description
- Command mode
- Syntax
- Show ipv6 interface
- Show ip route summary
- Syntax
- Show ipv6 route summary
- Show ipv6 route
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Example
- Example
- Description
- Command mode
- Chapter 33 sdm template commands
- Syntax
- Sdm prefer
- Privilege requirement
- Parameter
- Syntax
- Show sdm prefer
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Privilege requirement
- Description
- Command mode
- Chapter 34 aaa commands
- Aaa enable
- Syntax
- Tacacas server host
- Syntax
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- User guidelines
- Syntax
- Show tacacs server
- Radius server host
- Privilege requirement
- Example
- Description
- Command mode
- User guidelines
- Syntax
- Privilege requirement
- Parameter
- Command mode
- Syntax
- Show radius server
- Privilege requirement
- Example
- Description
- Command mode
- Aaa group
- Parameter
- Example
- Description
- Command mode
- Syntax
- Server
- Privilege requirement
- Syntax
- Show aaa group
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Aaa authentication login
- Parameter
- Example
- Description
- Command mode
- Aaa authentication enable
- User guidelines
- Syntax
- Privilege requirement
- User guidelines
- Syntax
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Aaa authentication dot1x default
- Parameter
- Example
- Description
- Command mode
- Aaa accounting dot1x default
- Syntax
- Privilege requirement
- Syntax
- Show aaa authentication
- Show aaa accounting
- Privilege requirement
- Parameter
- Example
- Description
- Command mode
- Parameter
- Login authentication telnet
- Line telnet
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Syntax
- Privilege requirement
- Login authentication ssh
- Line ssh
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Example
- Enable authentication telnet
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Example
- Enable authentication ssh
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Ip http login authentication
- Ip http enable authentication
- Example
- Description
- Command mode
- Command mode
- Syntax
- Show aaa global
- Privilege requirement
- Parameter
- Example
- Description
- Syntax
- Service dhcp relay
- Privilege requirement
- Ip helper address
- Example
- Description
- Command mode
- Chapter 35 dhcp relay commands
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Ip dhcp relay information
- Example
- Syntax
- Privilege requirement
- Parameter
- Ip dhcp relay information policy
- Ip dhcp relay information custom
- Example
- Description
- Command mode
- Example
- Description
- Command mode
- Syntax
- Privilege requirement
- Parameter
- Ip dhcp relay information circuit id
- Syntax
- Show ip dhcp relay
- Privilege requirement
- Parameter
- Ip dhcp relay information remote id
- Example
- Description
- Command mode
- Example
Похожие устройства
-
Tp-Link TL-SM321B-2Инструкция по инсталляции -
Tp-Link TL-SM321A-2Руководство по установке
-
Tp-Link tl-sg5428Руководство по установке -
Tp-Link tl-sg108eИнструкция по эксплуатации -
Tp-Link LS1005GИнструкция по эксплуатации
-
Tp-Link LS1005GИнструкция по эксплуатации -
Tp-Link LS105GИнструкция по эксплуатации
-
Tp-Link LS108GИнструкция по эксплуатации
-
Tp-Link TL-SF1008P V1Rackmount Switch_EU2_12Languages__ Installation Guide -
Tp-Link TL-SF1008P V1Руководство пользователя -
Tp-Link TL-SF1008P V3Rackmount Switch_EU2_12Languages__ Installation Guide
-
Tp-Link TL-SF1008P V3Руководство пользователя
Узнайте, как обновить резервный образ коммутатора и протестировать соединение с помощью команды ping. Подробные инструкции и параметры для успешного выполнения.