Tp-Link T1700G-28TQ V2 — настройка управления штормами: команды и примеры использования [177/354]

Превью страниц Страница 177 / 354

20.11 storm-control pps

Description

The storm-control pps command is used to configure the storm control

mode as pps(packets per second) on an interface. To disable the pps mode,

please use no storm-control pps command.

Syntax

storm-control pps

no storm-control pps

Command Mode

Interface Configuration Mode (interface gigabitEthernet / interface range

gigabitEthernet / interface ten-gigabitEthernet / interface range

ten-gigabitEthernet / interface port-channel / interface range port-channel)

Privilege Requirement

Only Admin, Operator and Power User level users have access to these

commands.

User Guidelines

This command should be used along with the storm-control command to

enable the storm control function and specify the detailed parameters in pps

mode.

Example

Set the storm control mode as pps on port 1/0/5:

T1700G-28TQ(config)# interface gigabitEthernet 1/0/5

T1700G-28TQ(config-if)# storm-control pps

20.12 storm-control

Description

The storm-control command is used to enable the broadcast, multicast, or

unicast strom control function and to set threshold levels on an interface. To

disable the storm control function, please use no storm-control command.

Syntax

storm-control { broadcast | multicast | unicast } { kbps | ratio | pps } {

rate

}

no storm-control { broadcast | multicast | unicast }

161