Tp-Link T1700G-28TQ V2 — настройка параметров мостов в различных экземплярах дерева [230/354]
Макгруп McGrp.ru

Tp-Link T1700G-28TQ V2 — настройка параметров мостов в различных экземплярах дерева [230/354]

Превью страниц Страница 230 / 354
Tp-Link T1700G-28TQ V2 [230/354] Syntax
different spanning tree instance. You can use this command to configure the
parameters of the ports in different instance IDs as well as view status of the
ports in the specified instance.
Syntax
spanning-tree mst instance
instance-id
{[ port-priority
pri
] | [ cost
cost
]}
no spanning-tree mst instance
instance-id
Parameter
instance-id
—— Instance ID, ranging from 1 to 8.
pri
—— Port Priority, which must be multiple of 16 ranging from 0 to 240. By
default, it is 128. Port Priority is an important criterion on determining if the
port will be chosen as the root port by the device connected to this port.
cost
—— Path Cost, ranging from 0 to 200000. The lower value has the
higher priority. Its default value is 0 meaning “auto”.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet / interface ten-gigabitEthernet / interface range
ten-gigabitEthernet / interface port-channel / interface range port-channel)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the priority of port 1 in MST Instance 1 as 64, and path cost as
2000:
T1700G-28TQ(config)# interface gigabitEthernet 1/0/1
T1700G-28TQ(config-if)# spanning-tree mst instance 1 port-priority 64
cost 2000
26.12 spanning-tree priority
Description
The spanning-tree priority command is used to configure the bridge priority.
To return to the default value of bridge priority, please use no spanning-tree
priority command.
Syntax
spanning-tree priority
pri
214

Содержание

2312

Похожие устройства

Узнайте, как настраивать параметры портов и просматривать их статус в различных экземплярах дерева. Подробная информация о приоритете и стоимости портов.

Google Play RuStore