Tp-Link T1700G-28TQ V2 — configure LLDP Transmit and SNMP Trap on Network Switch [305/354]

Превью страниц Страница 305 / 354

T1700G-28TQ(config-if)#lldp receive

30.5 lldp transmit

Description

The lldp transmit command is used to enable the designated port to transmit

LLDPDU. To disable the function, please use no lldp transmit command.

Syntax

lldp transmit

no lldp transmit

Command Mode

Interface Configuration Mode (interface gigabitEthernet / interface range

gigabitEthernet / interface ten-gigabitEthernet / interface range

ten-gigabitEthernet / interface port-channel / interface range port-channel)

Privilege Requirement

Only Admin, Operator and Power User level users have access to these

commands.

Example

Enable Gigabit Ethernet port 1/0/1 to transmit LLDPDU:

T1700G-28TQ(config)# interface gigabitEthernet 1/0/1

T1700G-28TQ(config-if)#lldp transmit

30.6 lldp snmp-trap

Description

The lldp snmp-trap command is used to enable the port’s SNMP notification.

If enabled, the port will notify the trap event to network management system.

To disable the ports' SNMP notification, please use no lldp snmp-trap

command.

Syntax

lldp snmp-trap

no lldp snmp-trap

289