Tp-Link T1700G-28TQ V2 — настройка метода управления портом IEEE 802.1X для сетевых устройств [131/354]

Превью страниц Страница 131 / 354

T1700G-28TQ(config-if)#dot1x port-control authorized-force

16.11 dot1x port-method

Description

The dot1x port-method command is used to configure the control type of

IEEE 802.1X for the specified port. By default, the control type is “mac-based”.

To restore to the default configuration, please use no dot1x port-method

command.

Syntax

dot1x port-method { mac-based | port-based }

no dot1x port-method

Parameter

mac-based | port-based ——The control type for the port.

mac-based: Any client connected to the port should pass the 802.1X

authentication for access.

port-based: All the clients connected to the port can access the network on

the condition that any one of the clients has passed the 802.1X

Authentication.

Command Mode

Interface Configuration Mode (interface gigabitEthernet / interface range

gigabitEthernet / interface ten-gigabitEthernet / interface range

ten-gigabitEthernet)

Privilege Requirement

Only Admin, Operator and Power User level users have access to these

commands.

Example

Configure the Control Type for Gigabit Ethernet port 1/0/20 as “port-based”:

T1700G-28TQ(config)#interface gigabitEthernet 1/0/20

T1700G-28TQ(config-if)#dot1x port-method port-based

115