Tp-Link T1700G-28TQ V2 — управление VLAN: Команды и Примеры Настройки [45/354]

Превью страниц Страница 45 / 354

Privilege Requirement

Only Admin, Operator and Power User level users have access to these

commands.

Example

Specify the name of VLAN 2 as “group1”:

T1700G-28TQ(config)# vlan 2

T1700G-28TQ(config-vlan)# name group1

4.4 switchport general allowed vlan

Description

The switchport general allowed vlan command is used to add the desired

General port to IEEE 802.1Q VLAN and specify the port’s type. To delete the

corresponding VLAN(s), please use no switchport general allowed vlan

command.

Syntax

switchport general allowed vlan

vlan-list

{ tagged | untagged }

no switchport general allowed vlan

vlan-list

Parameter

vlan-list

—— Specify IEEE 802.1Q VLAN ID list, ranging from 2 to 4094, in the

format of 2-3, 5. It is multi-optional.

tagged | untagged —— Egress rule，untagged or tagged. Tagged: All packets

forwarded by the port are tagged. The packets contain VLAN information.

Untagged: Packets forwarded by the port are untagged.

Command Mode

Interface Configuration Mode (interface gigabitEthernet / interface range

gigabitEthernet / interface ten-gigabitEthernet / interface range

ten-gigabitEthernet / interface port-channel / interface range port-channel)

Privilege Requirement

Only Admin, Operator and Power User level users have access to these

commands.

Example

Add port 4 it to VLAN 2 and configure the type of port 1/0/4 as tagged:

T1700G-28TQ(config)# interface gigabitEthernet 1/0/4