Tp-Link T1700G-28TQ V2 — настройка приоритета порта LACP и отображение EtherChannel [66/354]

Превью страниц Страница 66 / 354

8.4 lacp port-priority

Description

The lacp port-priority command is used to configure the LACP port priority

for specified ports. To return to the default configurations, please use no lacp

port-priority command.

Syntax

lacp port-priority

pri

no lacp port-priority

Parameter

pri

—— The port priority, ranging from 0 to 65535. It is 32768 by default.

Command Mode

Interface Configuration Mode (interface gigabitEthernet / interface range

gigabitEthernet / interface ten-gigabitEthernet / interface range

ten-gigabitEthernet)

Privilege Requirement

Only Admin, Operator and Power User level users have access to these

commands.

Example

Configure the LACP port priority as 1024 for ports 1-3:

T1700G-28TQ(config)# interface range gigabitEthernet 1/0/1-3

T1700G-28TQ(config-if-range)# lacp port-priority 1024

Configure the LACP port priority as 2048 for port 4:

T1700G-28TQ(config)# interface gigabitEthernet 1/0/4

T1700G-28TQ(config-if)# lacp port-priority 2048

8.5 show etherchannel

Description

The show etherchannel command is used to display the EtherChannel

information.