Tp-Link T1700G-28TQ V2 — настройка режима дуплекса и jumbo-фреймов для Ethernet портов [175/354]

Превью страниц Страница 175 / 354

20.8 duplex

Description

The duplex command is used to configure the Duplex Mode for an Ethernet

port. To return to the default configuration, please use no duplex command.

Syntax

duplex { auto | full | half }

no duplex

Parameter

auto | full | half —— The duplex mode of the Ethernet port. There are three

options: auto-negotiation mode, full-duplex mode and half-duplex mode. By

default the Gigabit Ethernet port is auto-negotiation mode.

Command Mode

Interface Configuration Mode (interface gigabitEthernet / interface range

gigabitEthernet / interface ten-gigabitEthernet / interface range

ten-gigabitEthernet / interface port-channel / interface range port-channel)

Privilege Requirement

Only Admin and Operator level users have access to these commands.

Example

Configure the Duplex Mode as full-duplex for port 1/0/3:

T1700G-28TQ(config)# interface gigabitEthernet 1/0/3

T1700G-28TQ(config-if)# duplex full

20.9 jumbo

Description

The jumbo command is used to allow the jumbo frame to pass through this

port. To disable this feature, please use no jumbo command. This feature is

disabled by default.

Syntax

jumbo

no jumbo

159