Ariston AVSD 1090 [10/72] Care and maintenance

Ariston AVSD 1090 [10/72] Care and maintenance
10
GB
Care and maintenance
Cutting off the water or electricity
supply
Turn off the water tap after every wash. This will
limit the wear of your appliance's water system
and also prevent leaks.
Unplug your appliance when cleaning it and
during all maintenance operations.
Cleaning your appliance
The exterior and rubber parts of your appliance can
be cleaned with a soft cloth soaked in lukewarm
soapy water. Do not use solvents or abrasives.
Cleaning the detergent dispenser
Remove the dispenser
by raising it and pulling it
out (see figure).
Wash it under running
water; this operation
should be repeated
frequently.
Caring for your appliance door and
drum
Always leave the appliance door ajar to prevent
unpleasant odours from forming.
Cleaning the pump
The washing machine is fitted with a self-cleaning
pump that does not require any maintenance.
Sometimes, small items (such as coins or buttons)
may fall into the pre-chamber that protects the
pump, situated in the lower part of the same.
Make sure the wash cycle has ended and unplug
the appliance.
To access the pre-chamber:
1. using a screwdriver,
remove the cover panel
on the lower front of the
washing machine (see
figure);
2. unscrew the lid
rotating it anti-
clockwise (see figure): a
little water may trickle
out. This is perfectly
normal;
3. clean the interior thoroughly;
4. screw the lid back on;
5. reposition the panel, making sure the hooks are
securely in place before you push it onto the
appliance.
Checking the water inlet hose
Check the water inlet hose at least once a year. If
you see any cracks, replace it immediately: during
the wash cycles, water pressure is very strong and
a cracked hose could easily split open.
Never use hoses that have already been used.
1
2

Содержание

Care and maintenance Cutting off the water or electricity supply Turn off the water tap after every wash This will limit the wear of your appliance s water system and also prevent leaks Unplug your appliance when cleaning it and during all maintenance operations Cleaning your appliance The exterior and rubber parts of your appliance can be cleaned with a soft cloth soaked in lukewarm soapy water Do not use solvents or abrasives Cleaning the pump The washing machine is fitted with a self cleaning pump that does not require any maintenance Sometimes small items such as coins or buttons may fall into the pre chamber that protects the pump situated in the lower part of the same Make sure the wash cycle has ended and unplug the appliance To access the pre chamber 1 using a screwdriver remove the cover panel on the lower front of the washing machine see figure Cleaning the detergent dispenser Remove the dispenser by raising it and pulling it out see figure Wash it under running water this operation should be repeated frequently 2 unscrew the lid rotating it anti clockwise see figure a little water may trickle out This is perfectly normal Caring for your appliance door and drum Always leave the appliance door ajar to prevent unpleasant odours from forming 3 clean the interior thoroughly 4 screw the lid back on 5 reposition the panel making sure the hooks are securely in place before you push it onto the appliance Checking the water inlet hose Check the water inlet hose at least once a year If you see any cracks replace it immediately during the wash cycles water pressure is very strong and a cracked hose could easily split open Never use hoses that have already been used 10

Скачать
Случайные обсуждения

Ответы 2

Здравствуйте! Прошу помощи. Стиральная машина Ariston avsd1090, при включении в розетку что-то щелкнуло и машинка больше не подавала признаков жизни. В блоке управления был заменен вздувшийся конденсатор c65 - 680мкфx10v, остальные коденсаторы в блоке питания были выпаяны и проверены прибором на соответствие емкости. Также была заменена микросхема U2- TNY264P. Напряжения +12В, +5В, +15В, +3,3В в норме. Визуально модуль был осмотрен, детали по возможности прозвонены тестером. При подсоединении модуля управления к машинке - она включилась и стала заливать и сразу выливать воду. При этом на дисплее моргал код ошибки "F12". Машина была выключена и проверена связь модуля с дисплеем по шлейфу. При прозвонке и шевелении разъемов - дефектов не выявлено. Напряжения на J11 +5В и +12В есть. Кроме этого на двух контактах еще присутствует по +5В. Наверное, там должны быть какие-то импульсы, но померять нечем. Подсоединяю разъем J1-220В и разъем J11- связь с дисплеем, моргает код "F12". Куда копать дальше? Может микроконтроллер сгорел (6433692B87HV)? И как это проверить? Буду благодарен за любую подсказку. Сразу предупреждаю - я любитель.
6 лет назад