Defort DPC-1316 [17/44] Working techniques
![Defort DPC-1316 [17/44] Working techniques](/views2/1066736/page17/bg11.png)
17
GB
Basic safety rules
Look around you:
• To ensure that people, animals or other things can-
not affect your control of the machine.
• To make sure that none of the above might come
within reach of your saw or be injured by falling
trees.
CAUTION! Follow the instructions above, but
do not use a chain saw in a situation where you
cannot call for help in case of an accident.
Do not use the machine in bad weather, such as dense
fog, heavy rain, strong wind, intense cold, etc.
Working
in bad weather is tiring and often brings added risks,
such as icy ground, unpredictable felling direction, etc.
3 Take great care when removing small branches and
avoid cutting bushes (i.e. cutting many small branches
at the same time). Small branches can be grabbed by
the chain and thrown back at you, causing serious in-
jury.
4 Take great care when cutting a tree that is in ten-
sion. A tree that is in tension may spring back to its
normal position before or after being cut. If you posi-
tion yourself incorrectly or make the cut in the wrong
place the tree may hit you or the machine and cause
you to lose control. Both situations can cause serious
personal injury.
5 Before moving your chain saw switch off the engine
and lock the chain using the chain brake. Carry the
chain saw with the bar and chain pointing backwards.
Fit a guard to the bar before transporting the chain saw
or carrying it for any distance.
6 When you put the chain saw on the ground, lock the
saw chain using the chain brake and ensure you have
a constant view of the machine. Switch the engine off
before leaving your chain saw for any length of time.
WARNING! Sometimes chips get stuck in the
clutch cover causing the chain to jam. Always
stop the engine before cleaning.
GENERAL RULES
1 If you understand what kickback is and how it hap-
pens then you can reduce or eliminate the element of
surprise. By being prepared you reduce the risk.
Kickback is usually quite mild, but it can sometimes be
very sudden and violent.
2 Always hold the chain saw fi rmly with your right hand
on the rear handle and your left hand on the front han-
dle. Wrap your fi ngers and thumbs around the handles.
You should use this grip whether you are right-handed
or left-handed. This grip minimises the effect of kick-
back and lets you keep the chain saw under control. Do
not let go of the handles!
3 Most kickback accidents happen during limbing.
Make sure you are standing fi rmly and that there is
nothing in the way that might make you trip or lose your
balance.
Warm engine
Use the same procedure as for starting a cold engine
but without setting the choke control in the choke posi-
tion. Set the throttle to the start position by pulling out
the blue choke control to the choke position and then
pushing it in again.
WARNING! Long term inhalation of the en-
gine’s exhaust fumes, chain oil mist and dust
from sawdust can represent a health risk.
• Never start a chain saw unless the bar, chain and
all covers are fi tted correctly. See instructions under
the heading Assembly. Without a bar and chain at-
tached to the chain saw the clutch can come loose
and cause serious injury.
• The chain brake should be activated when starting.
See instructions under the heading Start and stop.
Do not drop start. This method is very dangerous
because you may lose control of the saw.
• Never start the machine indoors. Exhaust fumes can
be dangerous if inhaled.
• Observe your surroundings and make sure that
there is no risk of people or animals coming into
contact with the cutting equipment.
• Always hold the saw with both hands. The right hand
should be on the rear handle, and the left hand on
the front handle. All people, whether right or left
handed, should use this grip. Use a fi rm grip with
thumbs and fi ngers encircling the chain saw han-
dles.
Stopping
Stop the engine by pressing down the stop button.
WORKING TECHNIQUES
BEFORE USE:
1 Check that the chain brake works correctly and is
not damaged.
2 Check that the rear right hand guard is not dam-
aged.
3 Check that the throttle lockout works correctly and
is not damaged.
4 Check that the stop switch works correctly and is
not damaged.
5 Check that all handles are free from oil.
6 Check that the anti vibration system works and is
not damaged.
7 Check that the muffl er is securely attached and not
damaged.
8 Check that all parts of the chain saw are tightened
correctly and that they are not damaged or miss-
ing.
9 Check that the chain catcher is in place and not
damaged.
10 Check the chain tension.
Содержание
- Dpc 1316 1
- Starting 3
- Stopping 3
- Antivibrationssystem 4
- Benzin kettensäge 4
- Die bedienungsanleitung aufmerksam durchlesen 4
- Kettenbremse mit handschutz 4
- Massnahmen vor der benutzung einer neuen motorsäge 4
- Persönliche schutzausrüstung 4
- Sicherheitsausrüstung des gerätes 4
- Wichtig 4
- Grundregeln 5
- Rückschlag reduzierende schneidausrüstung 5
- Stoppschalter 5
- Sägekette schärfen und tiefenbegrenzerabstand justieren 5
- Montage von schiene und kette 6
- Schmierung der schneidausrüstung 6
- Spannen der sägekette 6
- Benzin 7
- Kettenöl 7
- Kraftstoff 7
- Mischen 7
- Mischungsverhältnis 7
- Tanken 7
- Zweitaktöl 7
- Kalter motor 8
- Sicherer umgang mit kraftstoff 8
- Starten 8
- Starten und stoppen 8
- Grundlegende sicherheitsvor schriften 9
- Grundregeln 9
- Stoppen 9
- Vor jeder anwendung 9
- Warmer motor 9
- Allgemeines 10
- Feineinstellung des leerlaufs 10
- Funktion 10
- Grundeinstellung und einfahren 10
- Wartungsschema 10
- Chain brake and front hand guard 12
- General safety precautions 12
- Machine s safety equipment 12
- Personal protective equipment 12
- Petrol chainsaw 12
- Vibration damping system 12
- Cutting equipment designed to reduce kickback 13
- Cutting equipment general rules 13
- Sharpening your chain and adjust ing depth gauge setting 13
- Adjustment of depth gauge setting 14
- Lubricating cutting equipment 14
- Tensioning the chain 14
- Assembly 15
- Fitting the bar and chain 15
- Fuelling 15
- Mixing 15
- Mixing ratio 15
- Two stroke oil 15
- Cold engine 16
- Fuel safety 16
- Long term storage 16
- Starting and stopping 16
- Transport and storage 16
- Before use 17
- General rules 17
- Working techniques 17
- Carburettor adjustment 18
- Function 18
- General 18
- Maintenance schedule 18
- Frein de chaîne avec arceau protecteur 20
- Mesures à prendre avant de mettre en usage une tronçonneuse neuve 20
- Système anti vibrations 20
- Tronçonneuse d essence 20
- Équipement de protection personnelle 20
- Affûtage et réglage de l épaisseur du copeau de la chaîne 21
- Bouton d arrêt 21
- Règles élémentaires 21
- Silencieux 21
- Équipement de coupe anti rebond 21
- Lubrification de l équipement de coupe 22
- Tension de la chaîne 22
- Carburant 23
- Essence 23
- Huile deux temps 23
- Montage du guide chaîne et de la chaîne 23
- Mélange 23
- Rapport de mélange 23
- Démarrage et arrêt 24
- Huile pour chaîne 24
- Remplissage de carburant 24
- Sécurité carburant 24
- Transport et rangement 24
- Avant chaque utilisation 25
- Moteur chaud 25
- Règles élémentaires de sécurité 25
- Fonctionnement 26
- Généralités 26
- Règles élémentaires 26
- Réglage de base et rodage 26
- Réglage du carburateur 26
- Schéma d entretien 26
- Den lufteinlass der startvorrichtung reinigen 27
- Schrauben und muttern nachziehen 27
- Sicherstellen dass von motor tank oder kraftstoffl eitungen kein kraftstoff ausläuft 27
- Vergaserraum reinigen vergaser äußerlich reinigen 27
- Öltank leeren und innen reinigen 27
- Инструкция по технике безопасности 28
- Комплектация 28
- Пила бензиновая 28
- Технические характеристики 28
- Подготовка к работе 30
- Обслуживание 33
- Перечень работ по периодическому обслуживанию 35
- Циями гарантия на изделие утратит силу невыпол нение рекомендуемых правил обслуживания может привести к несчастным случаям пользователю цепной пилы не разрешается выполнять работы по обслуживанию которые не описаны в инструкции такая работа должна быть проведена в сервисном центре 35
- Чтобы обеспечить долговременное использование и предотвратить повреждения следует регулярно выполнять описанные ниже операции по обслу живанию изделия если периодический ремонт не будет выполняться регулярно и согласно с инструк 35
- Неисправности и их устранение 36
- Exploded view dpc 1316 38
- Spare parts list dpc 1316 39
- Environmental protection gb 40
- Hinweise zum umweltschutz de 40
- Informations sur la 40
- Protection de l environnement 40
- Указания по защите окружающей среды ru 40
Похожие устройства
- Hansa BOEI67230050 Инструкция по эксплуатации
- Defort DPC-2018 Инструкция по эксплуатации
- Panasonic CQ-C5303W Инструкция по эксплуатации
- Defort DPC-2220 Инструкция по эксплуатации
- Hansa BOEI67480050 Инструкция по эксплуатации
- Hansa BOEI66230030 Инструкция по эксплуатации
- Defort DEC-1646N Инструкция по эксплуатации
- Hansa BOEI67130020 Инструкция по эксплуатации
- Panasonic CQ-C5300N Инструкция по эксплуатации
- Defort DEC-2046N Инструкция по эксплуатации
- Panasonic CQ-C5100N Инструкция по эксплуатации
- Hansa BOEI64030020 Инструкция по эксплуатации
- Defort DDT-1100A Инструкция по эксплуатации
- Panasonic CQ-C3503N Инструкция по эксплуатации
- Hansa BOEI64130050 Инструкция по эксплуатации
- Defort DDT-1400A Инструкция по эксплуатации
- Panasonic CQ-C3403W Инструкция по эксплуатации
- Hansa BOEI62000020 Инструкция по эксплуатации
- Defort DGT-1010N Инструкция по эксплуатации
- Hansa BOEI62030030 Инструкция по эксплуатации