Citizen CT-E651L [59/72] Error indications

——

4.5 Error Indications

 Paper end, paper near-end

The end of the roll of paper is detected at two stages, paper near-end and

paperend.

When paper near-end is detected, the PAPER LED ashes. Prepare a new paper

roll.

When paper end is detected, the PAPER LED lights and the buzzer sounds. Load a

new paper roll. Memory switch settings can be used to disable the buzzer.

 Cover Open

If the cover is opened, the CUTTER LED lights and a buzzer sounds. The buzzer

may not sound depending on the memory switch setting. Do not open the cover

during printing. If the cover is accidentally opened, the CUTTER LED ashes.

Check the paper, pull it straight out of the printer by a couple of centimeters, and

then close the cover. Printing restarts. A command must be sent to restart printing

depending on the memory switch setting.

 Cutter error

If the auto cutter cannot move because of a paper jam or something else, the

CUTTER LED ashes and the buzzer sounds. Remove the cause of the trouble and

press the FEED button. If the auto cutter still does not move and the paper cover

cannot be opened, refer to “Clearing a Cutter Error.”

Refer to 4.2 Clearing a Cutter Error

 Print head hot

When you print dense characters, dark images, or for an extended time in a hot

environment, the print head temperature increases. If the print head exceeds a

specied temperature, the printer stops printing and waits for the print head to

cool. When this happens, the PAPER LED, CUTTER LED, and COVER LED ash.

Printing resumes automatically when the print head cools.

 Black mark/label gap detection error

The black mark or label gap cannot be detected.

The PAPER LED ashes and a buzzer sounds.

Adjust to black mark sensor or the label sensor with the paper you are using.

Refer to 3.12 Calibrating the Paper Sensor