DJI Inspire 1 Remote Controller [21/63] Intelligent orientation control ioc

Free zone

No restrictions.

None.

Semi-automatic descent: All stick commands are available except the throttle stick command during the descent and

landing process. Motors will stop automatically after landing.

When flying in the safety zone, aircraft status indicator will blink red quickly and continue for 3 seconds, then switch

to indicate current flying status and continue for 5 seconds at which point it will switch back to red blinking.

For safety reasons, please do not fly close to airports, highways, railway stations, railway lines, city centers and other

special areas. Try to ensure the aircraft is visible.

2.4 Intelligent Orientation Control (IOC)

IOC allows user to have lock the orientation of aircraft in different fashions. There are three working modes for IOC

and you may select the desired IOC modes from the DJI Pilot App. IOC only works under F mode, user must toggle

the flight mode switch to position1 to activate IOC. Refer to the table below

Course Lock (CL)

Its forward direction is pointing to the nose direction when recording, which

is fixed until you re-record it or exit from CL.

Home Lock (HL)

Record a Home Point (HP), push Pitch stick to control the aircraft far from

or near to the HP.

Point of Interest (POI)

Point of Interest. Record a point of interest (POI), the aircraft can circle

around the POI, and the nose always points to the POI.

2.5 Failsafe and Return Home

Failsafe and Return Home functions bring aircraft back to the Home Point when transmission signal is lost. Use these

two functions to prevent aircraft from flying away. Aircraft will automatically return to the recorded home point during

Failsafe and Return Home procedure, user may event control the orientation of the aircraft during Return Home

procedure.

Remote

Control

GPS

Descriptions