DJI Inspire 1 Remote Controller [45/63] Remove the gimbal cover

Free Mode- ：The Gimbal’s motion is independent of the aircraft’s orientation. One user

alone can control the pitch motion of the Gimbal, but a second user is required to control the roll motion

using a second remote controller.

Re-alignment ：Tap to force the Gimbal orientation to re-align with aircraft’s orientation

by panning from gimbal’s current orientation. Pitch angle will remain unchanged during the re-alignment.

4.2.3 Gimbal Error Warnings

Before the aircraft takes off, if a gimbal motor error is detected or the gimbal clamp is not removed, there will be a warning prompt on the

camera page of the DJI Pilot App. This will disappear after the problem is resolved.

(1) Remove gimbal clamp before powering on flight battery.

(2) Gimbal motor error may occur in these situations: (1) Gimbal is placed on uneven ground. (2) Gimbal

has received an excessive external force, e.g. a collision. Please take off from flat, open ground and

protect the gimbal after powering up.

(3) Flying in heavy fog or cloud may make the gimbal wet, leading to a temporary failure. The gimbal will

recover when it dries out.

4.2.4 Gimbal Installation

Remove the Gimbal Cover.