DJI Inspire 1 Remote Controller Руководство по эксплуатации онлайн [25/63] 771475

Place the Inspire 1 on a flat floor. Notice that the Optical Flow system cannot work properly on the floor surface that

do not have pattern variations.

Power on the Inspire 1 and wait until the self-initialization is completed. The rear LED will display a quickly flashing

purple light, which indicates the Optical Flow system is ready. Gently push the throttle up to liftoff, and the Inspire 1

will hover in place.

When Optical Flow system is in operation, you may check its status in DJI Inspire 1 App. A highlighted icon

indicates that Optical Flow system is active, while a gray icon indicates that Optical Flow system is not

activated.

 Keep the sensors clean at all times. Dirt or other debris may adversely affect the effectiveness of

the sensors.

 The effective hovering altitudes of the aircraft is from 0 to 2.5 meters.

 Optical Flow system may not function properly when the aircraft is flying over water.

 Optical Flow system may not be able to recognize pattern on the ground in low light conditions

(less than 100lux).

Keep your pets away from the aircraft when Optical Flow system is activated. The sonar sensor emits

high frequency sound that is only audible to some pets.