Vitek VT-1515 [5/36] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-1515 [5/36] English

Vitek VT-1515 [5/36] English
5
E N G L I S H
• Press the steam supply button (3) « », you
will hear a sound signal and the button (3)
illumination will be flashing. When the water
heats up to the required temperature, you
will hear sound signals and the button (3) illu-
mination will stop flashing and start glowing
constantly.
• Slowly turn the steam supply control knob (2)
«OFF--- +», steam will start going out from
the cappuccinator pipe (11) tip (12), be care-
ful while operating with outgoing steam, after
10-15 seconds set the control knob (2) to the
position «OFF» (pic. 3).
• Switch the coffee maker off by setting the
power switch (14) to the position «0» and
unplug the unit.
• Remove the tray grid (6), remove the tray and
pour the water out of it, install the tray an the
grid (6) back to their places.
• The coffee maker is ready for operation.
MAKING ESPRESSO
• Remove the water tank (8), fill it with cold
water up to the «MAX» mark and install back to
its place. Make sure that the water level in the
tank (8) is not below the mark «MIN», regularly
add water to the tank (8).
• Add ground coffee into the filter (15 or 16),
use the measuring spoon (19), slightly tamp
the coffee with the back side of the measuring
spoon (19) (pic. 4).
• Install the filter holder (17) back to its instal-
lation place. Filter holder ledges (17) should
match the groves on the boiler «INSERT»,
after that turn the filter holder (17) handle to
the utmost right position «CLOSE».
• Place the cup on the tray grid (6).
• Insert the power plug into the socket.
• Switch the coffee maker on by setting the
power switch to the position «I», you will hear
sound signals and the buttons (4, 5) illumina-
tion will start flashing.
• Wait until the water in the boiler heats up, you
will hear sound signals and the buttons (4, 5)
illumination will be glowing constantly.
Notes: - warm the cups that you want to use
first; to do this, place the cups on the cup warm-
ing tray (1), while water is heated in the boiler the
tray (1) heats up too, thus warming the cups.
– To make one cup of espresso, use the small
filter (15) and press the button (5) « », the
pump will be switched on and the water will
be supplied in small amounts for 20 sec-
onds. The operation time 20 seconds is set
by default.
– To make two cups of espresso use the big fil-
ter (16), in this case set one big or two small
cups on the grid (6). When you press the
button (4) « », the pump will be switched
on and the water will be supplied in small
amounts for 30 seconds. The operation time
30 seconds is set by default.
– If necessary, you can set up the pump oper-
ation time, in this case the amount of ready
coffee will be different. To set the pump oper-
ation time press the button (4 or 5) and hold it
for 3 seconds, the button (4 or 5) illumination
will be flashing. Release the button (4 or 5).
When the cup is filled to the required amount,
press the button (4 or 5) again. Next time the
coffee maker will make the preset amount of
ready coffee.
Notes: - you can set the pump operation time
from 15 to 75 seconds.
– To switch back to default settings simultane-
ously press and hold the buttons (4 and 5)
« » for 3 seconds, the buttons illumina-
tion will be flashing. Wait until the buttons (4,
5) illumination will be glowing constantly and
release the buttons. At the next switching on
the coffee maker will switch to default settings
of the amount of ready drink.
Notes:
– if you need to switch the water supply off dur-
ing the coffee making, press the button (4 or
5) again;
– successive making of coffee should be per-
formed with 2-3 min intervals;
– control the tray (6) filling, periodically pour out
the liquid and wash the tray (6).
• Switch the coffee maker off by setting the
power switch (14) to the position «0» and
unplug the unit.
• Wait until the coffee maker cools down and
remove the filter holder (17), turning the
holder (17) handle to the utmost left position
«INSERT».
• Remove the ground coffee remnants and
wash the filter (15 or 16). For easy removal of
the ground coffee remnants use the retainer
(18), you can use it to fix the filters (15 or
16) to prevent them from falling from the
holder (17).
IM VT-1515.indd 5 8/26/19 3:12 PM

Содержание

Похожие устройства

Скачать