Zyxel ZyWALL USG 300 [138/185] Zywall usg support notes

Zyxel ZyWALL USG 50 [138/185] Zywall usg support notes
ZyWALL USG Support Notes
138
All contents copyright (c) 2010 ZyXEL Communications Corporation.
you configured over 500 VPN settings. Please connect to console and you can see
which process the system is processing at.
Note: If the system is processing ok, admin can connect to ZyWALL USG‟s lan1 port
which is with IP address 192.168.1.1 by default.
2. The ZyWALL USG may get firmware crashed. Generally, it may happen if power
off ZyWALL USG when its during firmware upgrading. For this case, admin could
connect to console and see the message as shown below (ensure your terminal baud
rate is configured correctly).
If you do see the message, please start the firmware recovery procedure as following
steps.
1. Connect a PC with ZyWALL USGs lan1 port via an Ethernet cable.
2. ftp 192.168.1.1 from your FTP client or MS-DOS mode
3. Set the transfer mode to binary (use “bin” in the Windows command prompt).
4. Reload the firmware. (ex. use command “put 1.00(XL.1)C0.bin” to upload
firmware file)
5. Wait the FTP uploading completed and it will restart the ZyWALL USG
automatically.

Содержание

Похожие устройства