Zyxel IES-1000 EE [162/368] Logging in

Chapter 22 How to Access and Use the CLI

VOP1224-61 User’s Guide

162

2 Open a Telnet session to the VOP’s IP address. If this is your first login, use the

default values.

Make sure your computer IP address is in the same subnet, unless you are

accessing the VOP through one or more routers. In the latter case, make sure

remote management of the VOP is allowed via Telnet.

22.1.3 SSH

You can use this method if your VOP supports SSH connections.

1 Connect your computer to one of the Ethernet ports.

2 Use a SSH client program to access the VOP. If this is your first login, use the

default values in Table 57 on page 162 and Table 58 on page 162. Make sure your

computer IP address is in the same subnet, unless you are accessing the VOP

through one or more routers.

22.2 Logging in

Use the administrator username and password. If this is your first login, use the

default values. in some VOP models you may not need to enter the user name.

The VOP automatically logs you out of the management interface after five

minutes of inactivity. If this happens, simply log back in again. Use the sys stdio

set command to extend the idle timeout. For example, the VOP automatically

logs you out of the management interface after 60 minutes of inactivity after you

use the sys stdio set 60 command. Use the sys stdio show command to

display the current idle timeout setting.

Table 57 Default Management IP Address

SETTING DEFAULT VALUE

IP Address 192.168.1.1

Subnet Mask 255.255.255.0

Table 58 Default User Name and Password

SETTING DEFAULT VALUE

User Name admin

Password 1234