Zyxel IES-1000 EE [71/368] Hapter

VOP1224-61 User’s Guide

CHAPTER 11

ENET Port Setup

The ENET Port Setup screen allows you to configure settings for the Ethernet

ports.

To open this screen, click Basic Setting > ENET Port Setup.

Figure 26 ENET Port Setup

The following table describes the labels in this screen.

Table 15 ENET Port Setup

LABEL DESCRIPTION

Port This is the port index number.

Active Select the check box to turn on the port. Clear it to disable the port.

Name Enter a descriptive name that identifies this port. You can use up to

31 ASCII characters; spaces are not allowed.

Speed Mode Select the type of Ethernet connection for this port. When you don’t

use auto-negotiation, you must make sure that the settings of the

peer Ethernet port are the same in order to connect.

Select Auto (auto-negotiation) to have the VOP automatically

determine the type of connection that the Ethernet port has. When

the peer Ethernet device has auto-negotiation turned on, the VOP

negotiates with the peer to determine the connection speed. If the

peer Ethernet port does not have auto-negotiation turned on, the VOP

determines the connection speed by detecting the signal on the cable

and using full duplex.

Select 100 Copper if the Ethernet port has a 100 MB electrical

connection.

Duplex The VOP uses full duplex Ethernet connections.