Moxa TC-SW04-M12-4P-T [17/43] Installing a cellular module

Moxa TC-SW04-M12-8P [17/43] Installing a cellular module
TC-6000 Series Expansion Modules Hardware Connection Description
3-6
ATTENTION
You must be sure to set each module’s SMBus address
to a distinct value.
Do not set any cards with duplicate values, or you will create unpredictable
behavior (bugs) in your system.
Slot Value Address
1 1 0x26
2 2 0x25
3 3 0x24
4 4 0x23
Installing a Cellular Module
A single cellular accessory package includes a cellular module, a cellular antenna cable (that ends in an F type
barrel connector on one and a crimped slider on the other), two black screws, a locking washer, and a nut.
Follow the steps below to install a cellular module.
1. Insert the cellular module into the socket. Secure the module with 2 black screws.
2. Connect the antenna cable to the module. Make sure that the cable has been securely fastened.
3. Slide the F type connector of the antenna cable into the antenna hole on
the face of the module. Slide the locking washer over the barrel
connector, and then secure the connector to the face of the module
using the nut.
4. After you have installed the antennas barrel connector to the face of
the module, connect the cellular antenna.

Содержание

Скачать