Trotec Multi-Color-Jet [13/64] Location

Multi Color Jet

BEFORE OPERATION

14/09/2011 Trotec Produktions- und Vertriebs GmbH_Linzer Strasse 156, A-4600 Wels, Austria, Technical Support 13 / 64

tel_+43 (0)7242 239-7000, fax_+43 (0)7242 239-7380, mailto: techsupport@troteclaser.com

3.3 Location

Before you install the system, you should select an appropriate location. Follow the guidelines

shown below:

Avoid locations where the system is exposed to high temperatures, dust and

high humidity. (The humidity must not exceed 70% and the temperature

must not be close to the dew point.)

Avoid locations, where the system is exposed to mechanical shocks.

Fuse protection:

Do not connect other devices via the fuse, as the system requires the full

amperage.

Avoid locations with poor air circulation.

Select a location, whose room temperature is between 15 °C and 25 °C

(59° – 77° F). Avoid higher ambient temperatures and strong exposure of

the machine to the sun. Use blinds, if required.

Select a location close to the laser to ensure productivity.

Select a location that is not more than 2.50 m away from your computer

(max. cable length to avoid disturbing interferences).

Try to place a working table or a place to put things next to it. This shall

avoid, that the machine is misused as a table.