Air-O-Swiss E2441A [3/66] И e 2
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Air-O-Swiss E2441A [3/66] И e 2

Air-O-Swiss E2441A [3/66] И e 2
5
CAUTION
Damage to and cracks in the plastic caused by
additives in the water!
Do not put any additives (e.g. essential oils or
other fragrances) into the water.
Ensure that there are no water-soluble additives
(e.g. plant fertilizer) in a container before using
it to fill the unit.
Ⴇ
Ⴇ
CAUTION
Water damage due to overfilling!
When filling, do not exceed the maximum filling
capacity of 3.8 l, indicated by the filling level
line.
Ⴇ
Filling the unit at the filling opening:
Fill the unit with a clean container (e.g. a
jar or a watering can).
Pour fresh, cold water into the filling
opening of the upper part with a clean container.
Stop filling the unit as soon as the water
level indicator ring of the float appears in the fill-
ing opening.
The unit is filled with water and can be switched
on.
Filling the unit at the water base:
(( The unit is switched off and the power
plug is unplugged (see chapter "Switching the
unit on and off").
Lift the upper part from the base.
Lift the water base including the float as-
sembly by the base handles.
Fill fresh, cold water directly into the wa-
ter base.
Only pour water in until the maximum wa-
ter capacity fill line on the inner side of the water
base is reached.
Place the filled water base including the float as-
sembly onto the base.
Place the upper part on the base.
The unit is filled with water and can be switched
on.
Switching the unit on and off
If the unit is put into operation with an empty
water base or if the water base goes empty dur-
ing operation, the evaporator wick dries out, no
evaporation is generated and an unpleasant odor
can result.
The unit is filled with water.
Plug the power plug into the electrical socket.
Set the slide switch to position I or position II
according to your needs (see chapter "Operating
modes").
The unit is switched on.
Set the slide switch to position 0.
WARNING
Danger to life through electrical shock!
Do not unplug the unit from the electrical socket
with wet hands.
Ⴇ
1.
2.
3.
ᇒ
ᅛ
1.
2.
3.
4.
5.
6.
ᇒ
ᅛ
1.
2.
ᇒ
1.
D 1D 1
D 2D 2
D 3D 3
E 1E 1
E 2E 2
E 3E 3
E 4E 4
E 4E 4
S
witching the unit on and off
Unplug the power plug.
The unit is switched off and currentless.
Cleaning and servicing the unit
With increasing operating time, the air through-
put and evaporator performance of the evaporator
wick decrease. Therefore, regular maintenance and
cleaning of the unit is a requirement for smooth and
trouble-free operation.
CAUTION
Damage to the plastic due to unsuitable clean-
ing agents!
Do not use acidic cleaning agents.Ⴇ
Wipe the unit with a damp cloth.
Cleaning and servicing intervals
Recommended cleaning and servic-
ing intervals depend on air and water qual-
ity as well as actual operating time.
Interval Activity
once a day Check water level,
if necessary, refill water (see
chapter "Filling the unit")
1 week or
more without
operation
Empty and clean the unit (see
chapter "Taking apart and
emptying the unit")
every 2 weeks Clean water base (see chapter
"Cleaning the water base")
every 10–12
weeks (or as
needed)
Replace the evaporator wick
(see chapter "Replacing the
evaporator wick")
1–2 times a
year
Clean the fan (see chapter
"Cleaning the fan")
once a year Replace Ionic Silver Stick
®
(see chapter "Replacing the
Ionic Silver Stick
®
")
Taking apart and emptying the unit
The unit can easily be taken apart for cleaning.
WARNING
Danger to life through electrical shock!
Do not unplug the unit from the electrical socket
with wet hands.
Ⴇ
The unit is switched off and the power
plug is unplugged
Lift the upper part from the base.
Remove the water base including float as-
sembly using the provided base handles.
Empty the residual water from the water
base using the spout.
Remove the float assembly from the emp-
ty water base.
2.
ᇒ
Ⴇ
ᅛ
1.
2.
3.
4.
E 1E 1
C
leaning and servicing the unit
F 1F 1
F 3F 3
F 4F 4
F 5F 5
F 6F 6
WARNING
Danger to life through electrical shock!
Do not empty water over the electrical part.Ⴇ
If water is in the base: Empty and dry the base.
The unit is taken apart and emptied from water.
Cleaning the water base
Unit is taken apart and emptied from water
WARNING
Danger to life through electrical shock!
Unplug the power plug prior to cleaning.
Never submerge the base with the electrical part
and the fan in water.
Ⴇ
Ⴇ
Rinse out the water base with lukewarm
water.
For more thorough cleaning, clean the
water base with a commercial dish brush.
To decalcify the water base, use the recommend-
ed decalcification agent (see chapter "Spare
parts and accessories").
Dry the parts after cleaning.
Insert the float assembly into the empty water
base.
Put the unit together (see chapter "Putting the
unit together").
Cleaning the fan
Unit is taken apart and emptied from water.
Wipe off the fan with a slightly damp
cloth or cleaning rag.
Dry the parts after cleaning.
Put the unit together (see chapter "Putting the
unit together").
Replacing the evaporator wick
The evaporator wick should be replaced in the case
of heavy pollution, calcification, unpleasant odor,
reduced air throughput, etc. Evaporator wicks are
available from the specialty retailer where you pur-
chased the unit.
Unit is taken apart and emptied from water.
Only use the manufacturer's original evaporator
wicks (see chapter "Spare parts and accesso-
ries").
CAUTION
Damage to the damp evaporator wick due to
rinsing or wringing!
Do not rinse or wring out the evaporator wick.Ⴇ
To open the float assembly, turn the float
tip counter-clockwise (OPEN arrow) and pull up.
Pull the used evaporator wick up and out
of the float basket and discard it.
5.
ᇒ
ᅛ
1.
2.
3.
4.
5.
6.
ᅛ
1.
2.
3.
ᅛ
1.
2.
G 1G 1
G 2G 2
G 3G 3
H 1H 1
H 2H 2
Osteuropa_E2441.indb 5 25.06.2008 11:04:50

Содержание

Похожие устройства

CAUTION 2 GB Unplug the power plug The unit is switched off and currentless Damage te and cracks In the plastic caused by Danger to life through electrical shock additives In the water Do not put any additives e g essential oils or other fragrances into the water Ensure that there are no water soluble additives e g plant tertilizer in a container before using it to till the unit Cleaning and servicing the unit 5 If water is in the base Empty and dry the base put and evaporator performance of the evaporator wick decrease Therefore regular maintenance and cleaning of the unit is a requirement for smooth and trouble free operation The unit is taken apart and emptied from water CAUTION 2 i B P ur fresh cold water into the filling opening of the upper part with a clean container 3QB Stop tilling the unit as soon as the water level indicator ring of the float appears in the till ing opening The unit is filled with water and can be switched Cleaning the water base Unit is taken apart and emptied from water CAUTION A WARNING Damage to the plastic due to unsuitable clean ing agents Do not use acidic cleaning agents Riling the unit at the tilling opening Ш Fill the unit with a clean container e g a jar or a watering can Do not empty water over the electrical part With increasing operating time the air through Water damage due to overfilling When filling do not exceed the maximum tilling capacity of 3 8 I indicated by the tilling level line A WARNING Danger to life through electrical shock Unplug the power plug prior to cleaning Never submerge the base with the electrical part and the tan in water Wipe the unit with a damp cloth Cleaning and servicing intervals Recommended cleaning and servic ing intervals depend on air and water qual ity as well as actual operating time Interval on Riling the unit at the water base GB The unit is switched off and the power plug is unplugged see chapter Switching the unit on and off ИE2 И E3 Lift the upper part from the base Lift the water base including the float assembly by the base handles 3QB RII fresh cold water directly into the wa ter base Bl Only pourwater in until the maximum wa ter capacity fill line on the inner side of the water base is reached 5 Place the tilled water base including the float as sembly onto the base 6 Place the upper part on the base The unit is filled with water and can be switched on Activity t QB Rinse out the water base with lukewarm water 2 m For more thorough cleaning clean the water base with a commercial dish brush 3 To decalcify the water base use the recommend ed decalcification agent see chapter Spare parts and accessories 4 Dry the parts after cleaning 5 Insert the float assembly into the empty water base 6 Put the unit together see chapter Putting the unit together once a day Check water level if necessary refill water see chapter Riling the unit 1 week or more without operation Empty and clean the unit see chapter Taking apart and emptying the unit every 2 weeks Clean water base see chapter Cleaning the water base Unit is taken apart and emptied from water every 10 12 Replace the evaporator wick weeks or as needed see chapter Replacing the evaporator wick 1 2 times a year Clean the fan see chapter Cleaning the fan t m Wipe off the fan with a slightly damp cloth or cleaning rag 2 Dry the parts after cleaning 3 Put the unit together see chapter Putting the unit together once a year Replace Ion ic Silver Stick see chapter Replacing the Ionic Silver Stick Taking apart and emptying the unit Switching the unit on and off Cleaning the tan Replacing the evaporator wick The evaporator wick should be replaced in the case of heavy pollution calcification unpleasant odor reduced air throughput etc Evaporator wicks are available from the specialty retailer where you pur chased the unit The unit can easily be taken apart for cleaning If the unit is put into operation with an empty water base or if the water base goes empty dur ing operation the evaporator wick dries out no evaporation is generated and an unpleasant odor can result J The unit is filled with water 1 Plug the power plug into the electrical socket 2 Set the slide switch to position I or position II according to your needs see chapter Operating modes The unit is switched on 1 Set the slide switch to position 0 A WARNING Unit is taken apart and emptied from water A WARNING Danger to life through electrical shock Do not unplug the unit from the electrical socket with wet hands Only use the manufacturer s original evaporator wicks see chapter Spare parts and accesso ries CAUTION SB The unit is switched off and the power plug is unplugged Lift the upper part from the base Removethewaterbaseincludingfl oatas sembly using the provided base handles o Empty the residual water from the water base using the spout SB Remove the float assembly from the emp ty water base Damage to the damp evaporator wick due to rinsing or wringing Do not rinse or wring out the evaporator wick t QB To open the float assembly turn the float lip counter clockwise OPEN arrow and pull up 2 O Pull the used evaporator wick up and out of the float basket and discard it Danger to life through electrical shock Do not unplug the unit from the electrical socket with wet hands Osteuropa E2441 indt 5 5 25 06 2008 11 04 50

Скачать