Air-O-Swiss E2441A [4/66] A caution
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Air-O-Swiss E2441A [4/66] A caution

Air-O-Swiss E2441A [4/66] A caution
6
CAUTION
Damage to the unit due to removal of the float
body (styrofoam)!
Do not remove the float body (styrofoam) when
unpacking the unit.
Ⴇ
Push the new evaporator wick onto the
float basket.
To close the float assembly, place the
float tip on the float basket and the evapo-
rator wick, push down and turn clockwise
(CLOSE arrow).
To check, gently pull the float tip upwards. In do-
ing so, it should not lift off the float basket.
If necessary, turn the float tip again and re-
check.
Insert the float assembly into the empty water
base.
Put the unit together (see chapter "Putting the
unit together").
Replacing the Ionic Silver Stick
®
Unit is taken apart and emptied from water.
Remove the Ionic Silver Stick
®
from the bottom
of the water base and discard it.
Place the new Ionic Silver Stick
®
in the holder at
the bottom of the water base.
Insert the float assembly into the empty water
base.
Put the unit together (see chapter "Putting the
unit together").
Putting the unit together
Unit is taken apart and emptied from water.
Insert the float assembly into the water base.
Place the water base including the float
assembly on the base handles into the base.
Place the upper part onto the base.
Ensure that the unit is put together cor-
rectly.
Ensure that there are no foreign objects in the
unit.
The unit is put together.
Transporting the unit
CAUTION
Risk of injury by falling parts!
Always handle the unit by the base when un-
packing and lifting.
Ⴇ
CAUTION
Water damage due to water spilling over!
Empty the unit before transporting.Ⴇ
Empty the unit (see chapter "Taking apart and
emptying the unit").
Dry the unit.
Pick the unit up by the base and carry it to the
desired location.
3.
4.
5.
6.
7.
8.
ᅛ
1.
2.
3.
4.
ᅛ
1.
2.
3.
4.
5.
ᇒ
1.
2.
3.
H 3H 3
H 4H 4
B 5B 5
BB
T
ransport
i
ng t
h
e un
it
Storing the unit
Clean the unit (see chapter "Cleaning and servic-
ing the unit").
Dry the unit.
Pack the unit, preferably in the original packag-
ing.
Store the unit in a dry, cool place.
Disposing of the unit
Pass the outdated unit onto a specialized retailer
for professional disposal. Observe the applicable
national specifications when disposing of the unit.
You can find out about further disposal possibilities
from your municipality.
Spare parts and accessories
You can purchase spare parts and accessories from
specialized retailers and replace them on the unit
yourself. Only original parts from the manufacturer
can be used. Repairs can only be carried out by pro-
fessionals. This also applies to a faulty power cord.
Accessories Designation
Evaporator wick A7018
Ionic Silver Stick
®
A7017
Decalcification agent A7417
Frequently asked questions
Q. Why is the air moisture too low in my room?
A. How often do you use the unit? If the unit is only
in operation at night, the air moisture decreases
during the day as moisture is not being added to
the air constantly.
A. Wood, leather, carpeting, curtains and other
materials absorb a lot of moisture, resulting in
a decrease in air moisture.
If the window is open, moisture can escape
from the room.
A common reason is that the unit is placed next
to a heater in order to disperse the moisture
quickly throughout the room with the hot air.
However, this does not work. The escaping hot
air absorbs the majority of the moisture before
reaching the room air at all.
Q. Should I leave my door open or closed while
the unit is in operation?
A. With an open door, the moisture escapes the
room and disperses itself in other areas of the
house. If you want to increase the air moisture
in a certain room, you should make sure that
the door to that room remains closed while the
unit is in operation.
Q. How high should the air moisture be in my
room?
A. Air moisture of 40–60% is recommended.
1.
2.
3.
4.
Storin
g
the unit
Disposin
g
of the uni
t
Spare parts and accessorie
s
F
re
q
uent
ly
as
k
e
d
q
uest
i
ons
Q. What are the consequences of too low or too
high air moisture?
A. Dry air can lead to dry skin, electrostatic charg-
es, out of tune musical instruments, increased
dust development, damage to wooden items
(drying out and cracking), illness, disease and
drying out the nasal mucous membranes. Too
high air moisture can result in mold develop-
ment and wall paper falling off.
Q. Why do I need an Evaporator if I could also
simply open the window?
A. The air moisture in the outside air is not high
enough to moisturize a room.
Q. Where should I place my Evaporator?
A. The unit should be placed in the middle of the
room and not at a wall, a window, a door or
a thermal bridge so that the air can circulate
freely around the unit.
Q. Is it a problem if my unit runs dry?
A. If there is a possibility of the unit running dry,
e.g. when you cannot refill the water, switch the
unit off before leaving the room. Without water,
the unit cannot moisturize the air, which can
lead to an unpleasant odor.
Q. Can the unit be used through the entire
year?
A. Yes, you can use the unit the whole year. The
unit creates relative air moisture until the room
air is saturated. Thus the unit cannot make the
air "too moist".
Q. Can I clean the water base in the dishwash-
er?
A. No, you cannot clean the water base in the
dishwasher as it would otherwise melt.
Osteuropa_E2441.indb 6 25.06.2008 11:04:50

Содержание

Похожие устройства

Storing the unit Q What are the consequences of too low or too high air moisture CAUTION Damage to the unit due to removal of the float body styrofoam I Do not remove the float body styrofoam when unpacking the unit 1 Clean the unit see chapter Cleaning and servic ing the unit 2 Dry the unit 3 Pack the unit preferably in the original packag ing 4 Store the unit in a dry cool place 3 in Push the new evaporator wick onto the float basket m To close the tloat assembly place the float tip on the float basket and the evapo rator wick push down and turn clockwise CLOSE arrow 5 To check gently pull the tloat tip upwards In do ing so it should not lilt off the tloat basket 6 If necessary turn the float tip again and re check 7 Insert the tloat assembly into the empty water base 8 Put the unit together see chapter Putting the unit together Replacing the Ionic Silver Stick Unit is taken apart and emptied from water 1 Remove the Ionic Silver Stick from the bottom of the water base and discard it 2 Place the new Ionic Silver Stick in the holder at the bottom ot the water base 3 Insert the tloat assembly into the empty water base 4 Put the unit together see chapter Putting the unit together Putting the unit together Unit is taken apart and emptied from water 1 Insert the float assembly into the water base 2 QI Place the water base including the tloat assembly on the base handles into the base 3 Place the upper part onto the base 4 Q Ensure that the unit is put together cor rectly 5 Ensure that there are no foreign objects in the unit The unit is put together Transporting the unit Disposing of the unit high air moisture can result in mold develop ment and wall paper falling oft Q Why do I need an Evaporator if I could also simply open the window Pass the outdated unit onto a specialized retailer tor protessional disposal Observe the applicable national specifications when disposing ot the unit You can find out about further disposal possibilities tram your municipality Spare parts and accessories A The air moisture in the outside air is not high enough to moisturize a room Q Where should I place my Evaporator A The unit should be placed in the middle of the room and not at a wall a window a door or a thermal bridge so that the air can circulate freely around the unit You can purchase spare parts and accessories from Q Is it a problem it my unit runs dry specialized retailers and replace them on the unit yourself Only original parts trom the manufacturer can be used Repairs can only be carried out by pro fessionals This also applies to a faulty power cord A If there is a possibility of the unit running dry e g when you cannot retill the water switch the unit otf before leaving the room Without water the unit cannot moisturize the air which can lead to an unpleasant odor Accessories Designation Evaporator wick A7018 Ionic Silver Stick A7017 Decalcification agent A7417 Q Can the unit be used through the entire year A Yes you can use the unit the whole year The unit creates relative air moisture until the room air is saturated Thus the unit cannot make the air too moist Frequently asked questions Q Why Is the air moisture too low in my room A How often do you use the unit It the unit is only in operation at night the air moisture decreases during the day as moisture is not being added to the air constantly A Wood leather carpeting curtains and other Q Can I clean the water base in the dishwash er A No you cannot clean the water base in the dishwasher as it would otherwise melt materials absorb a lot ot moisture resulting in a decrease in air moisture If the window is open moisture can escape from the room A common reason is that the unit is placed next to a heater in order to disperse the moisture quickly throughout the room with the hot air However this does not work The escaping hot air absorbs the majority ot the moisture before reaching the room air at all A CAUTION Q Should I leave my door open or closed while the unit is in operation Risk of injury by falling parts A With an open door the moisture escapes the room and disperses itselt in other areas ot the Always handle the unit by the base when un packing and lifting A Dry air can lead to dry skin electrostatic charg es out ot tune musical instruments increased dust development damage to wooden items drying out and cracking illness disease and drying out the nasal mucous membranes Too house If you want to increase the air moisture in a certain room you should make sure that the door to that room remains closed while the unit is in operation CAUTION Water damage due to water spilling over Q How high should the air moisture be in my room Empty the unit before transporting A Air moisture ot 40 60 is recommended 1 Empty the unit see chapter Taking apart and emptying the unit 6 2 Dry the unit 3 Pick the unit up by the base and carry it to the desired location Osleuropa E2441 indb 6 25 06 2008 11 04 50

Скачать