Tp-Link TL-MR3020 [193/258] Factory defaults

TL-MR3020 Portable 3G/4G Wireless N Router

 Note:

1) New firmware versions are posted at http://www.tp-link.com and can be downloaded for free.

There is no

need to upgrade the firmware unless the new firmware has a new feature you

want to use. However, when experiencing problems caused by the Router rather than the

configuration, you can try to upgrade the firmware.

2) When you upgrade the Router's firmware, you may lose its current configurations, so before

upgrading the firmware please write down some of your customized settings to avoid losing

important settings.

the firmware is being upgraded.

automatically when the

→ Factor

y Defaults”, and then and you can restore the

en.

3) Do not turn off the Router or press the Reset button while

Loss of power during the upgrade could damage the Router.

4) The firmware version must correspond to the hardware.

5) The upgrade process takes a few moments and the Router restarts

upgrade is complete.

5.16.4 Factory Defaults

Choose menu “System Tools

configurations of the Router to factory defaults on the following scre

Figure 5-83 Restore Factory Default

Click the Restore button to reset all configuration settings to their default values.

 The default User Name: admin

All changed settings will

be lost when defaults are restored.

can save the

current

configuration of the Router as a backup file and restore the configuration via a backup file as

shown in Figure 5-84.

 The default Password: admin

 The default IP Address: 192.168.0.254

 The default Subnet Mask: 255.255.255.0

 Note:

5.16.5 Backup & Restore

Choose menu “System Tools → Backup & Restore”, and then you

-182-