Tp-Link TL-MR3020 — настройка виртуальных серверов на беспроводном маршрутизаторе [77/258]

Превью страниц Страница 77 / 258

TL-MR3020 Portable 3G/4G Wireless N Router

4.8.1 Virtual Servers

Choose menu “Forwarding→Virtual Servers”, you can view and add virtual servers in the

next screen (shown in Figure 4-38). Virtual servers can be used for setting up public services

on you

r LAN, such as DNS, Email and FTP. A virtual server is defined as a service port, and all

requests from the Internet to this service port will be redirected to the computer specified by

the server IP. Any PC that was used for a virtual server must have a static or reserved IP

Address because its IP Address may be changed when using the DHCP function.

Figure 4-38 Virtual Servers

 Service Port - The numbers of External Ports. You can type a service port or a range of

service ports (in XXX – YYY format, XXX is the start port number, YYY is the end port

number).

 Internal Port - The Internal Service Port number of the PC running the service application.

You can leave it blank if the Internal Port is the same as the Service Port, or enter a

specific port number when Service Port is a single one.

 IP Address - The IP Address of the PC providing the service application.

 Protocol - The protocol used for this application, either TCP, UDP, or All (all protocols

supported by the Router).

 Status - The status of this entry either Enabled or Disabled.

To setup a virtual server entry:

1. Click the Add New… button. (pop-up Figure 4-39)

Select the service you want to use from the Common Service Port list. If the Common

Service Port list does not have the service that you want to use, type the number of the

service port or service port range in the Service Port box.

3. Type the IP Address of the computer in the IP Address box.

4. Select the protocol used for this application, either TCP or UDP, or All.

5. Select the Enable check box to enable the virtual server.

6. Click the Save button.

-66-