Tp-Link TL-MR3020 [231/258] Dhcp clients list

Превью страниц Страница 231 / 258

TL-MR3020 Portable 3G/4G Wireless N Router

 End IP Address - This field specifies the last address in the IP Address pool.

192.168.0.199 is the default end IP address.

0 minutes. The default value is 120 minutes.

 Default Gateway (optional) - Enter the IP address of the gateway for your LAN. The factory

default setting is 192.168.0.254.

 Default Domain (optional) - Enter the domain name of your DHCP server. You can leave the

field blank.

 Prima DNS IP address provided by your ISP. Consult your ISP

S value. The factory default setting is 0.0.0.0.



Note:

1) When the device is working on Dynamic IP mode, the DHCP Server function will be

disabled.

2) To use the DHCP server function of the device, you should configure all computers in the

LAN as "Obtain an IP Address automatically" mode. This function will not take effect until

the device reboots.

6.7.2 DHCP Clients List

Selecting DHCP > DHCP Clients List will enable you to view the Client Name, MAC Address,

Assigned IP and Lease Time for each DHCP Client attached to the device (Figure 6-21).

 Address Lease Time - Enter the amount of time for the PC to connect to the AP with it

current assigned dynamic IP address. The time is measured in minutes. After the time is up,

the PC will be automatically assigned a new dynamic IP address. The range of the time is 1

288

DNS (optional) - Enter the

if you don’t know the DN

 Secondary DNS (optional) - Enter the IP address of another DNS server if your ISP

provides two DNS servers. The factory default setting is 0.0.0.0.

Click Save to save the changes.

Figure 6-21 DHCP Clients List

 ID - Here displays the index of the DHCP client.

P client.  Client Name - Here displays the name of the DHC

-220-