Tp-Link TL-MR3020 [228/258] Wireless advanced

TL-MR3020 Portable 3G/4G Wireless N Router

6.6.4 Wireless Advanced

Selecting Wireless > Wireless Advanced will allow you to do some advanced settings for the

device in the following screen shown in Figure 6-17. As the configuration for each oper

ation

Point mode for example here. mode is almost the same, we take Access

Figure 6-17 Wireless Advanced



Beacon Interval - Specifies a value between 20-1000 milliseconds. The beacons are the

wireless network. Beacon Interval value

S (

Request to Send) Threshold. If the packet is larger

RTS frames to a particular

e default value is 2346.

packets. 2346 is the default setting and is

 DTIM Interval - Determines the interval of the Delivery Traffic Indication Message (DTIM).

You can specify the value between 1-255 Beacon Intervals. The default value is 1, which

indicates the DTIM Interval is the same as Beacon Interval.

WMM - WMM

function can guarantee the packets with high- priority messages

packets sent by the device to

synchronize a

determines the time interval of the beacons. The default value is 100.

 RTS Threshold - Specifies the RT

than the specified RTS Threshold size, the device will send

receiving station and negotiate the sending of a data frame. Th

 Fragmentation Threshold - This value is the maximum size determining whether

packets will be fragmented. Setting the Fragmentation Threshold too low may result in

poor network performance since excessive

recommended.

 Enable

being transmitted preferentially. It is strongly recommended enabled.

 Enable Short GI - This function is recommended for it will increase the data capacity by

reducing the guard interval time.

-217-