D-Link DGS-1210-52/ME rev.A [106/457] Delete snmp host
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

D-Link DGS-1210-52/ME rev.A [106/457] Delete snmp host

D-Link DGS-1210-52/ME rev.A [106/457] Delete snmp host
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
88
generated by the Switch’s SNMP agent.
Parameters
<ipaddr> − The IP address of the remote management station to
serve as the SNMP host for the Switch.
v1 – Specifies that SNMP version 1 is to be used. The Simple
Network Management Protocol (SNMP), version 1, is a network
management protocol that provides a means to monitor and control
network devices.
v2c – Specifies that SNMP version 2c is to be used. The SNMP v2c
supports both centralized and distributed network management
strategies. It incluDGS improvements in the Structure of
Management Information (SMI) and adds some security features.
v3 – Specifies that the SNMP version 3 is to be used. SNMP v3
provides secure access to devices through a combination of
authentication and encrypting packets over the network. SNMP v3
adds:
Message integrity − ensures that packets have not been
tampered with during transit.
Authentication − determines if an SNMP message is from a
valid source.
Encryption − scrambles the contents of messages to prevent
it being viewed by an unauthorized source.
<username 32> − A string of up to 32 alphanumeric characters that
identifies user name of an SNMP community. This string is used like
a password to give remote SNMP managers access to MIB objects
in the Switch’s SNMP agent.
noauth_nopriv − Specifies that there is no authorization and no
encryption of packets sent between the Switch and a remote SNMP
manager.
auth_nopriv − Specifies that authorization is required, but there is no
encryption of packets sent between the Switch and a remote SNMP
manager.
auth_priv − Specifies that authorization is required, and that packets
sent between the Switch and a remote SNMP manger are
encrypted.
Restrictions
Only Administrator, operator and powe user-level users can issue
this command.
Example usage:
To create an SNMP host to receive SNMP messages:
DGS-1210-28P/ME:5# create snmp host 10.90.90.22 v3 noauth_nopriv
dlink
Command: create snmp host 10.90.90.22 v3 noauth_nopriv dlink
Success.
DGS-1210-28P/ME:5#
delete snmp host
Purpose
To remove a recipient of SNMP traps generated by the Switch’s
SNMP agent.

Содержание

Похожие устройства

Скачать