D-Link DGS-1210-52/ME rev.A [158/457] Show utilization

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide

140

RX Frames TX Frames

------------------ -------------------

CRC Error 0 Excessive Deferral 0

Undersize 0 CRC Error 0

Oversize 0 Late Collision 0

Fragment 8 Excessive Collision 0

Jabber 0 Single Collision 0

Drop Pkts 0 Collision 0

DGS-1210-28P/ME:5#

show utilization

Purpose

To display real-time port utilization statistics.

Syntax

show utilization [ports {<portlist>} | cpu | mem]

Description

The show utilization command displays the real-time utilization

statistics for ports in bits per second (bps) for the Switch, and for the

CPU in percentage..

Parameters

ports – Entering this parameter will display the current port utilization

of the Switch.

<portlist> – Specifies a range of ports to be displayed.

cpu – Entering this parameter will display the current CPU utilization

of the Switch.

mem – Entering this parameter will display the current memory

utilization of the Switch.

Restrictions

None.

To display the port 2 utilization statistics:

DGS-1210-28P/ME:5# show utilization ports 2

Command: show utilization ports 2

2 0 0 0

Port TX/sec RX/sec Util

------ -------- ---------- ----

2 0 0 0

CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh

DGS-1210-28P/ME:5#

To display the cpu utilization statistics:

DGS-1210-28P/ME:5# show utilization cpu

Command: show utilization cpu

Five Seconds - 6 % One Minute - 6 % Five Minutes - 6 %

Five Seconds - 7 % One Minute - 6 % Five Minutes - 6 %