D-Link DGS-1210-52/ME rev.A [260/457] Web based access control commands
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

D-Link DGS-1210-52/ME rev.A [260/457] Web based access control commands

D-Link DGS-1210-52/ME rev.A [260/457] Web based access control commands
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
242
30
WEB-BASED ACCESS CONTROL COMMANDS
The Web-Based Access Control commands in the Command Line Interface (CLI) are listed (along with the
appropriate parameters) in the following table.
Command
Parameter
enable wac
disable wac
config wac
default_redirpath
<string 20>
config wac method
{radius | local}
config wac ports
[<portlist> | all] [state [enable | disable] | aging_time [infinite | <min 1-1440>] |
block_time <sec 0-300>]
config wac
switch_http_port
<tcp_port_number 1-65535> {https}
config wac virtual_ip
[<ipaddr> | <ipv6addr>]
create wac user
<username 15> vlanid <vlanid 1-4094> password <passwd 16>
delete wac user
<username 15>
show wac user
show wac
show wac ports
[all | <portlist>]
show wac auth_state
ports
[all | <portlist>]
Each command is listed in detail, as follows:
enable wac
Purpose
To enable the WAC function.
Syntax
enable wac
Description
The enable wac command is used to enable the WAC function.
Parameters
None.
Restrictions
Only administrator or operator-level users can issue this command.
Example usage:
To enable the WAC function:
DGS-1210-28P/ME:5# enable wac
Command: enable wac

Содержание

Похожие устройства

Скачать