D-Link DGS-1210-52/ME rev.A [368/457] Routing table commands

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide

350

ROUTING TABLE COMMANDS

The Routing table commands in the Command Line Interface (CLI) are listed (along with the appropriate

parameters) in the following table.

Command

Parameter

create iproute

default <ipaddr> {<value 1-254>}

delete iproute

{default}

show iproute

{<ipaddr> | static}

Each command is listed in detail, as follows:

create iproute

Purpose

Used to create IP route entries to the Switch’s IP routing table.

Syntax

create iproute default <ipaddr> {<value 1-254>}

Description

The create iproute command is used to create a default static IP

route entry to the Switch’s IP routing table.

Parameters

default – Specifies to create a default IP route entry.

<ipaddr> − The gateway IP address for the next hop router.

<value 1-254> − Allows the entry of a routing protocol metric entry,

representing the number of routers between the Switch and the IP

address above. The default setting is 1.

Restrictions

Only Administrator, operator and power user-level users can issue

this command.

Example usage:

To add the default static address 10.90.90.92 to the routing table:

DGS-1210-28P/ME:5# create iproute default 10.90.90.92

Command: create iproute default 10.90.90.92

Success.

DGS-1210-28P/ME:5#