D-Link DGS-1210-52/ME rev.A [40/457] Config autoconfig
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

D-Link DGS-1210-52/ME rev.A [40/457] Config autoconfig

D-Link DGS-1210-52/ME rev.A [40/457] Config autoconfig
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
22
disable autoconfig
Purpose
Use this to deactivate auto configuration from DHCP.
Syntax
disable autoconfig
Description
The disable autoconfig command is used to instruct the Switch not
to accept auto configuration instruction from the DHCP server. This
does not change the IP settings of the Switch. The ipif settings will
continue as DHCP client until changed with the config ipif command.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To stop the auto configuration function:
DGS-1210-28P/ME:5# disable autoconfig
Command: disable autoconfig
Success.
DGS-1210-28P/ME:5#
config autoconfig
Purpose
Use to configure the auto configuration timeout time from DHCP.
Syntax
config autoconfig timeout <value 1-65535>
Description
The config autoconfig command is used to the auto configuration
timeout time from DHCP.
Parameters
timeout <value 1-65535> - Specifies the timeout time. And the value
is from 1 to 65535 seconds.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To configure the auto configuration timeout time to 100 seconds:
DGS-1210-28P/ME:5# config autoconfig timeout 100
Command: config autoconfig timeout 100
Success.
DGS-1210-28P/ME:5#
show autoconfig
Purpose
Used to display the current autoconfig status of the Switch.
Syntax
show autoconfig
Description
The show autoconfig command is used to list the current status of
the auto configuration function.
Parameters
None.

Содержание

Похожие устройства

Скачать