![D-Link DGS-1210-52/ME rev.A [275/457] Config link_aggregation algorithm](/img/pdf.png)
D-Link DGS-1210-52/ME rev.A [275/457] Config link_aggregation algorithm
![D-Link DGS-1210-52/ME rev.A [275/457] Config link_aggregation algorithm](/views2/1459147/page275/bg113.png)
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
257
Restrictions
Only administrator or operator-level users can issue this command.
Link aggregation groups may not overlap.
Example usage:
To define a load-sharing group of ports, group-id 2 with group members ports 1-5:
DGS-1210-28P/ME:5# config link_aggregation group_id 2 master_port 1 ports 1-5
Command: config link_aggregation group_id 2 master_port 1 ports 1-5
Success.
DGS-1210-28P/ME:5#
config link_aggregation algorithm
Purpose
To configure the link aggregation algorithm.
Syntax
config link_aggregation algorithm [ip_source | ip_destination |
ip_source_dest | mac_source | mac_destination |
mac_source_dest]
Description
The config link_aggregation algorithm command is used to
configure the part of the packet examined by the Switch when
selecting the egress port for transmitting load-sharing data. This
feature is only available using the address-based load-sharing
algorithm.
Parameters
ip_source − Indicates that the Switch should examine the IP source
address.
ip_destination − Indicates that the Switch should examine the IP
destination address.
ip_source_dest − Indicates that the Switch should examine the IP
source and destination addresses.
mac_source − Indicates that the Switch should examine the MAC
source address.
mac_destination − Indicates that the Switch should examine the
MAC destination address.
mac_source_dest − Indicates that the Switch should examine the
MAC source and destination addresses.
Restrictions
Only administrator or operator-level users can issue this command.
Example usage:
To configure link aggregation algorithm for ip_source:
DGS-1210-28P/ME:5# config link_aggregation algorithm ip_source
Command: config link_aggregation algorithm ip_source
Success.
DGS-1210-28P/ME:5#
config link_aggregation state
Purpose
To enable or disable the link aggregation state.
Syntax
config link_aggregation state [enable | disable]
Description
The config link_aggregation state command is used to enable or
Содержание
- Cli reference guide 1
- Table of contents 4
- Introduction 19
- Using the console cli 21
- Command syntax 25
- Square brackets 25
- Vertical bar 25
- Braces 26
- Line editing key usage 26
- Multiple page display control keys 26
- Basic switch commands 28
- Command parameter 28
- Command parameter 29
- Enable password encryption 29
- Create account 30
- Disable password encryption 30
- Config account 31
- Delete account 32
- Reset account 32
- Show account 32
- Show session 33
- Show switch 33
- Show environment 34
- Disable jumbo_frame 35
- Enable jumbo_frame 35
- Show jumbo_frame 35
- Config serial_port 36
- Show serial_port 36
- Config bootrom password 37
- Enable clipaging 37
- Disable clipaging 38
- Enable web 38
- Disable web 39
- Enable autoconfig 39
- Config autoconfig 40
- Disable autoconfig 40
- Show autoconfig 40
- Disable auto learning 41
- Enable auto learning 41
- Reboot 42
- Logout 44
- Reload config config_id 44
- Traceroute 47
- Traceroute6 48
- Reset cpu port 49
- Show cpu port 49
- Disable telnet 50
- Enable telnet 50
- Telnet 50
- Config time_range 51
- Show tech support 52
- Show time_range 52
- Clear tech support 53
- Command parameter 54
- Disable smtp 54
- Enable smtp 54
- Smtp server commands 54
- Config smtp 55
- Show smtp 55
- Smtp sent_testmsg 56
- Command parameter 58
- Config command_prompt 58
- Modify banner and prompt commands 58
- Config greeting_message 59
- Show greeting_message 60
- Command parameter 61
- Config ddp 61
- Config ddp report 61
- Dlink discover protocol commands 61
- Config ddp report timer 62
- Command parameter 63
- Config ports 63
- Switch port commands 63
- Show ports 64
- Delete ports 65
- Command parameter 66
- Disable loopdetect 66
- Enable loopdetect 66
- Loopback detection commands 66
- Config loopdetect mode 67
- Config loopdetect ports 67
- Config loopdetect 68
- Show loopdetect 68
- Command parameter 70
- Config dos_prevention dos_type 70
- Dos prevention commands 70
- Show dos_prevention 71
- Disable dos_prevention trap_log 72
- Enable dos_prevention trap_log 72
- Command parameter 73
- Config pppoe circuit_id_insertion state 73
- Pppoe circuit id insertion commands 73
- Config pppoe circuit_id_insertion ports 74
- Show pppoe circuit_id_insertion 75
- Show pppoe circuit_id_insertion ports 75
- Command parameter 77
- Config filter dhcp_server 77
- Dhcp server screening commands 77
- Config filter dhcp_server 78
- Show filter dhcp_server 78
- Show dhcp_server screening 79
- Command parameter 80
- Ip mac port binding commands 80
- Command parameter 81
- Create address_binding ip_mac 81
- Config address_binding ip_mac log 82
- Config address_binding ip_mac ports 82
- Config address_binding auto_scan 83
- Show address_binding ip_mac log 83
- Config address_binding auto_scan ipv6address 84
- Delete address_binding 84
- Show address_binding 85
- Disable address_binding dhcp_snoop 86
- Enable address_binding dhcp_snoop 86
- Show address_binding auto_scan list 86
- Config address_binding dhcp_snoop max_entry ports 87
- Show address_binding dhcp_snoop 87
- Disable address_binding dhcp_pd_snoop 88
- Enable address_binding dhcp_pd_snoop 88
- Config address_binding vlan 89
- Show address_binding dhcp_pd_snoop 89
- Disable address_binding roaming 90
- Enable address_binding roaming 90
- Show address_binding roaming 90
- Clear address_binding dhcp_snoop binding_entry ports 91
- Command parameter 92
- Network management snmp commands 92
- Command parameter 93
- Command parameter 94
- Command parameter 95
- Create snmp user 95
- Delete snmp user 96
- Show snmp user 96
- Create snmp view 97
- Delete snmp view 97
- Create snmp community 98
- Show snmp view 98
- Delete snmp all_community 99
- Delete snmp community 99
- Config snmp engineid 100
- Show snmp community 100
- Enable community_encryption 101
- Show snmp engineid 101
- Disable community_encryption 102
- Show community_encryption 102
- Create snmp group 103
- Delete snmp group 104
- Show snmp global state 104
- Create snmp host 105
- Show snmp groups 105
- Delete snmp host 106
- Create snmp v6host 107
- Show snmp host 107
- Delete snmp v6host 108
- Enable trusted_host 109
- Show snmp v6host 109
- Create trusted_host 110
- Disable trusted_host 110
- Show trusted_host 111
- Delete trusted_host 112
- Enable snmp traps 112
- Disable snmp authenticate traps 113
- Disable snmp traps 113
- Enable snmp authenticate traps 113
- Enable snmp linkchange_traps 114
- Show snmp traps 114
- Config snmp linkchange_traps ports 115
- Disable snmp linkchange_traps 115
- Show snmp traps linkchange_traps 116
- Config snmp system_contact 117
- Config snmp system_location 117
- Config snmp system_name 117
- Config snmp coldstart_traps 118
- Config snmp warmstart_traps 118
- Disable snmp 119
- Enable snmp 119
- Enable snmp dhcp_ screening traps 119
- Disable snmp dhcp_ screening traps 120
- Disable snmp impb_violation traps 120
- Enable snmp impb_violation traps 120
- Disable snmp firmware_upgrade_state traps 121
- Enable snmp firmware_upgrade_state traps 121
- Disable snmp lbd traps 122
- Enable snmp lbd traps 122
- Enable snmp port_security_violation traps 122
- Disable snmp port_security_violation traps 123
- Enable snmp rstpport_state_change traps 123
- Disable snmp duplicate_ip_detected traps 124
- Disable snmp rstpport_state_change traps 124
- Enable snmp duplicate_ip_detected traps 124
- Command parameter 126
- Download 126
- Download upload commands 126
- Upload 127
- Config configuration config_id 128
- Show config 129
- Show firmware information 129
- Config firmware image_id 130
- Show boot_file 130
- Show flash information 131
- Command parameter 132
- Dhcp relay commands 132
- Command parameter 133
- Disable dhcp_relay 133
- Enable dhcp_relay 133
- Config dhcp_relay add ipif system 134
- Config dhcp_relay port 134
- Config dhcp_relay delete ipif system 135
- Config dhcp_relay hops 135
- Config dhcp_relay option_82 136
- Config dhcp_relay vlan 136
- Show dhcp_relay 137
- Enable dhcp_local_relay 138
- Config dhcp_local_relay port 139
- Disable dhcp_local_relay 139
- Config dhcp_local_relay vlan 140
- Show dhcp_local_relay 140
- Disable dhcpv6_relay 141
- Enable dhcpv6_relay 141
- Show dhcpv6_relay 141
- Config dhcpv6_relay 142
- Config dhcpv6_relay hop_count 143
- Config dhcpv6_relay option_18 143
- Config dhcpv6_relay option_37 144
- Config dhcpv6_relay option_38 144
- Show dhcpv6_relay option_38 145
- Command parameter 146
- Config gratuitous_arp send ipif_status_up 146
- Gratuitous arp commands 146
- Config gratuitous_arp learning 147
- Config gratuitous_arp send dup_ip_detected 147
- Disable gratuitous_arp 148
- Enable gratuitous_arp 148
- Config gratuitous_arp send periodically interval 149
- Show gratuitous_arp 149
- Command parameter 151
- Config power_saving 151
- Config power_saving mode 151
- Power saving commands 151
- Show power_saving 152
- Command parameter 153
- Cpu protection commands 153
- Disable cpu_protect 153
- Enable cpu_protect 153
- Config cpu_protect type 154
- Show cpu_protect 154
- Command parameter 156
- Network monitoring commands 156
- Show packet ports 156
- Show error ports 157
- Show utilization 158
- Clear counters 159
- Save log 159
- Clear log 160
- Enable syslog 160
- Show log 160
- Disable syslog 161
- Show syslog 161
- Create syslog host 162
- Config syslog host 164
- Delete syslog host 166
- Show syslog host 166
- Cable diagnostic port 167
- Config syslogintimeout 167
- Config sysgroupinterval 168
- Show log_software_module 168
- Command parameter 170
- Config poe ports 170
- Poe commands 170
- Config poe system 171
- Show poe ports 171
- Show poe system 172
- Command parameter 174
- Config stp 174
- Spanning tree commands 174
- Config stp ports 175
- Config stp fbpdu 177
- Config stp priority 177
- Config stp version 177
- Disable stp 178
- Enable stp 178
- Show stp 179
- Show stp ports 180
- Show stp instance 181
- Create stp instance_id 182
- Show stp mst_config_id 182
- Config stp instance_id 183
- Delete stp instance_id 183
- Config stp mst_config_id 184
- Config stp mst_ports 184
- Command parameter 186
- Create fdb 186
- Forwarding database commands 186
- Config multicast_fdb 187
- Create multicast_fdb 187
- Config fdb aging_time 188
- Delete multicast_fdb 188
- Delete fdb 189
- Enable flood_fdb 189
- Config flood_fdb 190
- Disable flood_fdb 190
- Show flood_fdb 190
- Clear flood_fdb 191
- Show multicast_fdb 191
- Show fdb 192
- Clear fdb 193
- Config multicast vlan_filtering_mode 193
- Create auto_fdb 194
- Delete auto_fdb 194
- Show auto_fdb 194
- Broadcast storm control commands 196
- Command parameter 196
- Config traffic control 196
- Config traffic trap 197
- Show traffic control 197
- Command parameter 199
- Disable password_recovery 199
- Enable password_recovery 199
- Password recovery commands 199
- Show password_recovery 200
- Command parameter 201
- Qos commands 201
- Command parameter 202
- Config scheduling 203
- Show scheduling 203
- Config bandwidth_control 204
- Config cos mac_mapping 205
- Show bandwidth_control 205
- Delete cos mac_mapping 206
- Show cos mac_mapping 206
- Config cos ip_mapping 207
- Delete cos ip_mapping 207
- Show cos ip_mapping 207
- Config cos ipv6_mapping 208
- Show cos ipv6_mapping 208
- Config cos ipv6_tc_mapping 209
- Delete cos ipv6_mapping 209
- Delete cos ipv6_tc_mapping 210
- Show cos ipv6_tc_mapping 210
- Config cos mapping 211
- Show cos mapping 211
- Config cos protocol_mapping 212
- Show cos protocol_mapping 212
- Config cos vlanid_mapping 213
- Delete cos protocol_mapping 213
- Show cos vlanid_mapping 213
- Config cos tos value 214
- Delete cos vlanid_mapping 214
- Config cos tcp_port_mapping 215
- Show cos tos 215
- Delete cos tcp_port_mapping 216
- Show cos tcp_port_mapping 216
- Config cos udp_port_mapping 217
- Show cos udp _port_mapping 217
- Config 802 p user_priority 218
- Delete cos udp_port_mapping 218
- Config 802 p default_priority 219
- Show 802 p user_priority 219
- Config scheduling_mechanism 220
- Show 802 p default_priority 220
- Show scheduling_mechanism 221
- Config dscp tos mode 222
- Config dscp_mapping 222
- Show dscp_mapping 223
- Command parameter 224
- Enable rmon 224
- Rmon commands 224
- Create rmon alarm 225
- Disable rmon 225
- Delete rmon alarm 226
- Show rmon alarm 226
- Create rmon collection stats 227
- Create rmon collection history 228
- Delete rmon collection stats 228
- Create rmon event 229
- Delete rmon collection history 229
- Delete rmon event 230
- Show rmon 230
- Show rmon statistics 230
- Command parameter 232
- Disable mirror 232
- Enable mirror 232
- Port mirroring commands 232
- Config mirror target 233
- Show mirror 234
- Command parameter 235
- Vlan commands 235
- Command parameter 236
- Create vlan 236
- Config vlan 237
- Delete vlan 237
- Config gvrp 238
- Config gvrp timer 238
- Disable gvrp 239
- Enable gvrp 239
- Create dot1v_protocol_group 240
- Show vlan 240
- Config dot1v_protocol_group 241
- Delete dot1v_protocol_group 241
- Config port dot1v ports all 242
- Show dot1v_protocol_group 242
- Show port dot1v 243
- Show gvrp 244
- Show gvrp timer 244
- Disable vlan_trunk 245
- Enable vlan_trunk 245
- Show vlan_trunk 245
- Config vlan_trunk ports 246
- Enable asymmetric_vlan 246
- Disable asymmetric_vlan 247
- Enable pvid auto_assign 247
- Show asymmetric_vlan 247
- Disalbe pvid auto_assign 248
- Show pvid auto_assign 248
- Create mac_based_vlan mac address 249
- Deleete mac_based_vlan mac address 249
- Config vlan_auto_learn 250
- Show mac_based_vlan mac address 250
- Show vlan_auto_learn 251
- Command parameter 252
- Mac based access control commands 252
- Config mac_based_access_control password 253
- Disable mac_based_access_control 253
- Enable mac_based_access_control 253
- Config mac_based_access_control method 254
- Config mac_based_access_control port 254
- Config mac_based_access_control log state 255
- Config mac_based_access_control trap state 255
- Config mac_based_access_control log max_users 256
- Create mac_based_access_control_local mac_address 256
- Show mac_based_access_control 257
- Show mac_based_access_control_local 257
- Delete mac_based_access_control_local 258
- Show mac_based_access_control auth_state ports 258
- Command parameter 260
- Enable wac 260
- Web based access control commands 260
- Config wac default_redirpath 261
- Disable wac 261
- Config wac method 262
- Config wac ports 262
- Config wac switch_http_port 263
- Config wac virtual_ip 263
- Create wac user 264
- Delete wac user 264
- Show wac 265
- Show wac user 265
- Show wac ports 266
- Show wac auth_state ports 267
- Command parameter 268
- Enable qinq 268
- Q in q commands 268
- Disable qinq 269
- Show qinq 269
- Config qinq inner_tpid 270
- Config qinq ports 270
- Create vlan_translation 271
- Show vlan_translation 271
- Delete vlan_translation ports 272
- Command parameter 273
- Create link_aggregation 273
- Link aggregation commands 273
- Config link_aggregation group_id 274
- Delete link_aggregation 274
- Config link_aggregation algorithm 275
- Config link_aggregation state 275
- Show link_aggregation 276
- Basic ip commands 277
- Command parameter 277
- Create ipif 277
- Delete ipif 278
- Disable ipif 278
- Enable ipif 278
- Config ipif 279
- Bpdu attack protection commands 281
- Command parameter 281
- Config bpdu_protection ports 281
- Config bpdu_protection recovery_timer 282
- Config bpdu_protection 283
- Enable bpdu_protection 283
- Disable bpdu_protection 284
- Show bpdu_protection 284
- Command parameter 286
- Config ethernet_oam ports 286
- Ethernet oam commands 286
- Config ethernet_oam ports 287
- Show ethernet_oam ports 288
- Show ethernet_oam ports 289
- Show ethernet_oam ports 290
- Show ethernet_oam ports 291
- Clear ethernet_oam ports 292
- Command parameter 293
- Disable mac_notification 293
- Enable mac_notification 293
- Mac notification commands 293
- Config mac_notification 294
- Config mac_notification ports 294
- Show mac_notification 295
- Show mac_notification ports 295
- Command parameter 297
- Igmp snooping commands 297
- Command parameter 298
- Config igmp_snooping 298
- Config igmp_snooping querier 299
- Create igmp_snooping multicast_vlan 299
- Config igmp_snooping multicast_vlan 300
- Config igmp_snooping multicast_vlan_group 301
- Delete igmp_snooping multicast_vlan 301
- Clear igmp_snooping data_driven_group 302
- Config igmp_snooping data_driven_learning 302
- Config router_ports 303
- Config router_ports_forbidden 303
- Config igmp access_authentication ports 304
- Show igmp access_authentication ports 304
- Disable igmp_snooping 305
- Enable igmp_snooping 305
- Show igmp_snooping 306
- Show igmp_snooping forwarding 307
- Show igmp_snooping group 307
- Show igmp_snooping host 308
- Show igmp_snooping multicast_vlan 308
- Show igmp_snooping multicast_vlan_group 309
- Show router_ports 309
- Command parameter 311
- Disable l2protocol_tunnel 311
- Enable l2protocol_tunnel 311
- Layer 2 protocol tunneling commands 311
- Config l2protocol_tunnel ports 312
- Show l2protocol_tunnel 312
- Command parameter 314
- Config ddm ports 314
- Digital diagnostic monitoring commands 314
- Config ddm power_unit 315
- Show ddm ports 315
- Command parameter 317
- Mld snooping commands 317
- Command parameter 318
- Disable mld_snooping 318
- Enable mld_snooping 318
- Config mld_snooping 319
- Create mld_snooping multicast_vlan 319
- Config mld_snooping multicast_vlan 320
- Delete mld_snooping multicast_vlan 321
- Show mld_snooping multicast_vlan 321
- Config mld_snooping multicast_vlan_group 322
- Show mld_snooping multicast_vlan_group 322
- Config mld_snooping mrouter_ports 323
- Config mld_snooping mrouter_ports_forbidden 323
- Config mld_snooping querier 324
- Config mld_snooping data_driven_learning 325
- Clear mld_snooping data_driven_group 326
- Show mld_snooping 326
- Show mld_snooping forwarding 327
- Show mld_snooping group 328
- Show mld_snooping mrouter_ports 328
- Show mld_snooping host 329
- Command parameter 330
- Create mcast_filter_profile 330
- Limited ip multicast address commands 330
- Config mcast_filter_profile profile_id 331
- Config mcast_filter_profile profile_name 331
- Config mcast_filter_profile ipv6 332
- Delete mcast_filter_profile 332
- Show mcast_filter_profile 333
- Config limited_multicast_addr 334
- Show limited_multicast_addr 334
- Config max_mcast_group 335
- Show max_mcast_group 335
- Command parameter 337
- X commands 337
- Command parameter 338
- Disable 802 x 338
- Enable 802 x 338
- Show 802 x 339
- Show 802 x auth_state 339
- Show 802 x auth_configuration 340
- Config 802 x auth_parameter ports 341
- Config 802 x init 342
- Config 802 x auth_protocol 343
- Config 802 x reauth 343
- Config radius add 344
- Config radius delete 344
- Config radius 345
- Config 802 x fwd_pdu system 346
- Show radius 346
- Config 802 x auth_mode 347
- Show 802 x fwd_pdu system status 347
- Create 802 x guest_vlan 348
- Delete 802 x guest_vlan 348
- Config 802 x guest_vlan ports 349
- Show 802 x guest_vlan 349
- Create 802 x user 350
- Show 802 x user 350
- Config 802 x capability ports 351
- Delete 802 x user 351
- Command parameter 353
- Config port_security 353
- Port security commands 353
- Show port_security 354
- Delete port_security _entry 355
- Command parameter 356
- Config sntp 356
- Time and sntp commands 356
- Enable sntp 357
- Show sntp 357
- Config time 358
- Disable sntp 358
- Config dst 359
- Config time_zone operator 359
- Show time 360
- Arp commands 362
- Command parameter 362
- Create arpspoofing 362
- Delete arpspoofing 363
- Show arpspoofing 363
- Clear arptable 364
- Config arp_aging time 364
- Config arpentry 365
- Create arpentry 365
- Delete arpentry 366
- Show arpentry 366
- Show arpentry aging_time 367
- Command parameter 368
- Create iproute 368
- Routing table commands 368
- Delete iproute 369
- Show iproute 369
- Command parameter 370
- Commands 370
- Config duld ports 370
- D link unidirectional link detection duld 370
- Config duld recover_timer 371
- Show duld ports 371
- Show duld recover_timer 372
- Command parameter 373
- Create ipv6 neighbor_cache 373
- Ipv6 neighbor discovery commands 373
- Delete ipv6 neighbor_cache 374
- Show ipv6 neighbor_cache 374
- Config ipv6 nd ns ipif 375
- Show ipv6 nd 375
- Create ipv6route default 376
- Delete ipv6route default 376
- Enable ipif_ipv6_link_local_auto 377
- Show ipv6route 377
- Disable ipif_ipv6_link_local_auto 378
- Banner commands 379
- Command parameter 379
- Config log_save_timing 379
- Show log 380
- Show log_save_timing 380
- Command history list commands 381
- Command parameter 381
- Show command_history 382
- Command logging commands 384
- Command parameter 384
- Disable command logging 384
- Enable command logging 384
- Show command logging 385
- Command parameter 386
- Enable ssh 386
- Ssh commands 386
- Config ssh algorithm 387
- Disable ssh 387
- Config ssh authmode 388
- Show ssh authmode 388
- Config ssh server 389
- Show ssh server 389
- Config ssh user 390
- Show ssh algorithm 390
- Show ssh user authmode 391
- Command parameter 392
- Enable ssl 392
- Ssl commands 392
- Disable ssl 393
- Show ssl 393
- Download ssl certificate 394
- Access authentication control commands 395
- Command parameter 395
- Command parameter 396
- Create authen_login method_list_name 396
- Config authen_login 397
- Delete authen_login method_list_name 398
- Show authen_login 398
- Show authen_policy 399
- Config authen_enable 400
- Create authen_enable method_list_name 400
- Delete authen_enable method_list_name 402
- Show authen_enable 402
- Disable authen_policy 403
- Enable authen_policy 403
- Config authen application 404
- Show authen application 404
- Config authen parameter 405
- Create authen server_host 406
- Show authen parameter 406
- Config authen server_host 407
- Delete authen server_host 408
- Show authen server_host 409
- Config authen server_group 410
- Create authen server_group 410
- Delete authen server_group 411
- Show authen server_group 411
- Enable admin 412
- Config accounting 413
- Config admin local_enable 413
- Config accounting service 414
- Config accounting service command 415
- Create accounting method_list_name 415
- Delete accounting method_list_name 416
- Show accounting method_list_name 416
- Disable aaa_server_password_encryption 417
- Enable aaa_server_password_encryption 417
- Show aaa 418
- Command parameter 419
- Config eee port 419
- Energy efficient ethernet commands 419
- Show eee_mode port 419
- Command parameter 421
- Config lacp port_priority 421
- Lacp commands 421
- Show lacp 421
- Config lacp_ports 422
- Command parameter 424
- Lldp commands 424
- Config lldp message_tx_interval 425
- Disable lldp 425
- Enable lldp 425
- Config lldp message_tx_hold_multiplier 426
- Config lldp reinit_delay 426
- Config lldp notification_interval 427
- Config lldp tx_delay 427
- Show lldp 427
- Show lldp ports 428
- Show lldp local_ports 429
- Config lldp ports 430
- Show lldp remote_ports 430
- Config lldp ports 431
- Config lldp ports 432
- Config lldp ports 433
- Show lldp mgt_addr 434
- Show lldp statistics 434
- Show lldp power_pse_tlv 435
- Access control list commands 436
- Command parameter 436
- Command parameter 437
- Create access_profile 437
- Config access_profile 439
- Delete access_profile 443
- Show access_profile 443
- Create cpu_access_profile 444
- Config cpu_access_profile 445
- Delete cpu_access_profile 447
- Config flow_meter profile_id 448
- Show cpu_access_profile 448
- Show flow_meter 449
- Command parameter 450
- Config traffic_segmentation 450
- Show traffic_segmentation 450
- Traffic segmentation commands 450
- Command parameter 452
- Config safeguard_engine 452
- Safeguard commands 452
- Show safeguard_engine 452
- Device specifications 454
- Technical specifications 454
- Supported transceivers 457
Похожие устройства
- D-Link DGS-1210-52MPP/ME Краткое руководство по установке
- D-Link DGS-1210-52P/ME Краткое руководство по установке
- D-Link DGS-1510-10L/ME Руководство пользователя _Web UI_
- D-Link DGS-1510-10L/ME Руководство пользователя _CLI_
- D-Link DGS-1510-10L/ME Руководство по установке
- D-Link DGS-1510-10L/ME Краткое руководство по установке
- D-Link DGS-1510-28LP/ME Руководство по установке
- D-Link DGS-1510-28LP/ME Руководство пользователя _CLI_
- D-Link DGS-1510-28LP/ME Краткое руководство по установке
- D-Link DGS-1510-28LP/ME Руководство пользователя _Web UI_
- D-Link DGS-1510-28XMP/ME Руководство пользователя _CLI_
- D-Link DGS-1510-28XMP/ME Руководство пользователя _Web UI_
- D-Link DGS-1510-28XMP/ME Руководство по установке
- D-Link DGS-1510-28XMP/ME Краткое руководство по установке
- D-Link DGS-1510-52L/ME Руководство по установке
- D-Link DGS-1510-52L/ME Руководство пользователя _CLI_
- D-Link DGS-1510-52L/ME Руководство пользователя _Web UI_
- D-Link DGS-1510-52L/ME Краткое руководство по установке
- D-Link DGS-1510-52X/ME Руководство по установке
- D-Link DGS-1510-52X/ME Руководство пользователя _CLI_