D-Link DGS-1210-52/ME rev.A [364/457] Clear arptable

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide

346

To delete the ARP spoofing configuration:

DGS-1210-28P/ME:5# create ArpSpoofing ip_address 10.2.1.1

Command: create ArpSpoofing ip_address 10.2.1.1

Success.

DGS-1210-28P/ME:5#

config arp_aging time

Purpose

To configure the age-out timer for ARP table entries on the Switch.

Syntax

config arp_aging time <value 0-65535>

Description

The config arp_aging time command sets the maximum amount of

time, in minutes, that an ARP entry can remain in the Switch’s ARP

table, without being accessed, before it is dropped from the table.

Parameters

<value 0-65535> – The ARP age-out time, in minutes. The value

may be in the range of 0-65535 minutes, with a default setting of 20

minutes.

Restrictions

Only Administrator or operator-level users can issue this command.

Example usage:

To configure ARP aging time:

DGS-1210-28P/ME:5# config arp_aging time 30

Command: config arp_aging time 30

Success.

DGS-1210-28P/ME:5#

clear arptable

Purpose

To remove all dynamic ARP table entries.

Syntax

clear arptable

Description

The clear arptable command is used to remove dynamic ARP table

entries from the Switch’s ARP table. Static ARP table entries are not

affected.

Parameters

None.

Restrictions

Only Administrator or operator-level users can issue this command.

Example usage: