D-Link DGS-1210-52/ME rev.A [38/457] Disable clipaging
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

D-Link DGS-1210-52/ME rev.A [38/457] Disable clipaging

D-Link DGS-1210-52/ME rev.A [38/457] Disable clipaging
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
20
DGS-1210-28P/ME:5# enable clipaging
Command: enable clipaging
Success.
DGS-1210-28P/ME:5#
disable clipaging
Purpose
Used to disable the pausing of the console screen scrolling at the
end of each page when a command displays more than one screen
of information.
Syntax
disable clipaging
Description
The disable clipaging command is used to disable the pausing of
the console screen at the end of each page when a command would
display more than one screen of information.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To disable pausing of the screen display when the show command output reaches the end of the page:
DGS-1210-28P/ME:5# disable clipaging
Command: disable clipaging
Success.
DGS-1210-28P/ME:5#
enable web
Purpose
To enable the HTTP-based management software on the Switch.
Syntax
enable web {<tcp_port_number 1-65535>}
Description
The enable web command enables the Web-based management
software on the Switch. The user can specify the TCP port number
the Switch uses to listen for Telnet requests.
Parameters
<tcp_port_number 1-65535> − The TCP port number. TCP ports are
numbered between 1 and 65535. The ‘well-known’ port for the Web-
based management software is 80.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To enable HTTP and configure the TCP port number to listen for Telnet requests:
DGS-1210-28P/ME:5# enable web 80
Command: enable web 80
Note: SSL will be disabled if web is enabled.
Success.
DGS-1210-28P/ME:5#

Содержание

Похожие устройства

Скачать