D-Link DGS-1210-52/ME rev.A [37/457] Enable clipaging
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

D-Link DGS-1210-52/ME rev.A [37/457] Enable clipaging

D-Link DGS-1210-52/ME rev.A [37/457] Enable clipaging
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
19
5_minutes − The console will log out the current user if there is no
user input for 5 minutes.
10_minutes − The console will log out the current user if there is no
user input for 10 minutes.
15_minutes − The console will log out the current user if there is no
user input for 15 minutes.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To configure the serial port baud rate:
DGS-1210-28P/ME:5# config serial_port baud_rate 115200
Command: config serial_port baud_rate 115200
Please change your baud rate to 115200 for new baud rate !!
Success.
DGS-1210-28P/ME:5#
config bootrom password
Purpose
Used to configure the password when booting ROM.
Syntax
config bootrom password <string20>
Description
The config bootrom password command is used to configure the
password when booting ROM.
Parameters
<string 20> - Specifies the password.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To configure the boot ROM password:
DGS-1210-28P/ME:5# config bootrom password 1234
Command: config bootrom password 1234
Success.
DGS-1210-28P/ME:5#
enable clipaging
Purpose
Used to pause the scrolling of the console screen when a command
displays more than one page.
Syntax
enable clipaging
Description
The enable clipaging command is used when issuing a command
which causes the console screen to rapidly scroll through several
pages. This command will cause the console to pause at the end of
each page. The default setting is enabled.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To enable pausing of the screen display when the show command output reaches the end of the page:

Содержание

Похожие устройства

Скачать