D-Link DGS-1210-52/ME rev.A [197/457] Config traffic trap
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

D-Link DGS-1210-52/ME rev.A [197/457] Config traffic trap

D-Link DGS-1210-52/ME rev.A [197/457] Config traffic trap
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
179
To configure traffic control and enable broadcast storm control system wide:
DGS-1210-28P/ME:5# config traffic control all multicast enable unicast disable
broadcast enable threshold 64
Command: config traffic control all multicast enable unicast disable broadcast e
nable threshold 64
*Note: Setting count down for drop mode port was ignored.
Success.
DGS-1210-28P/ME:5#
show traffic control
Purpose
To display current traffic control settings.
Syntax
show traffic control {<portlist>}
Description
The show traffic control command displays the current storm traffic
control configuration on the Switch.
Parameters
<portlist> - A port or range of ports whose settings are to be
displayed.
Restrictions
None.
Example usage:
To display traffic control setting for ports 1-3:
DGS-1210-28P/ME:5# show traffic control 1-3
Command: show traffic control 1-3
Traffic Storm Control Trap : [None]
Port Thres Broadcast Multicast Unicast Action Count Time
hold Storm Storm Storm down Interval
---- ------- -------------- ------------- ---------- -------- -------- --------
1 64 Enabled Enabled Disabled Drop 0 0
2 64 Enabled Enabled Disabled Drop 0 0
3 64 Enabled Enabled Disabled Drop 0 0
Total Entries : 3
DGS-1210-28P/ME:5#
config traffic trap
Purpose
To configure the traffic control trap on the Switch.
Syntax
config traffic trap [storm_cleared | storm_occured | both | none]
Description
The config traffic trap command configures the current storm traffic
trap configuration on the Switch.
Parameters
storm_cleared – A notification will be generated when a storm event

Содержание

Похожие устройства

Скачать