![D-Link DGS-1210-52/ME rev.A [148/457] Disable gratuitous_arp](/img/pdf.png)
D-Link DGS-1210-52/ME rev.A [148/457] Disable gratuitous_arp
![D-Link DGS-1210-52/ME rev.A [148/457] Disable gratuitous_arp](/views2/1459147/page148/bg94.png)
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
130
gratuitous ARP packets.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To enable learning of ARP entries based on the received gratuitous ARP packets:
DGS-1210-28P/ME:5# config gratuitous_arp learning enable
Command: config gratuitous_arp learning enable
Success.
DGS-1210-28P/ME:5#
enable gratuitous_arp
Purpose
Used to enable the gratuitous ARP trap and log.
Syntax
enable gratuitous_arp [log | trap]
Description
The enable gratuitous_arp command is used to enable gratuitous
ARP trap and log states. The Switch can trap or log the IP conflict
event to inform the administrator. By default, the trap is disabled and
event log is enabled.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To enable the System’s interface gratuitous ARP trap:
DGS-1210-28P/ME:5# enable gratuitous_arp trap
Command: enable gratuitous_arp trap
Success.
DGS-1210-28P/ME:5#
disable gratuitous_arp
Purpose
Used to disable the gratuitous ARP trap and log.
Syntax
disable gratuitous_arp [log | trap]
Description
The disable gratuitous_arp command is used to disable gratuitous
ARP trap and log states. The Switch can trap and log the IP conflict
event to inform the administrator. By default, the trap is disabled and
event log is enabled.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To disable the System’s interface gratuitous ARP trap:
Содержание
- Cli reference guide 1
- Table of contents 4
- Introduction 19
- Using the console cli 21
- Command syntax 25
- Square brackets 25
- Vertical bar 25
- Braces 26
- Line editing key usage 26
- Multiple page display control keys 26
- Basic switch commands 28
- Command parameter 28
- Command parameter 29
- Enable password encryption 29
- Create account 30
- Disable password encryption 30
- Config account 31
- Delete account 32
- Reset account 32
- Show account 32
- Show session 33
- Show switch 33
- Show environment 34
- Disable jumbo_frame 35
- Enable jumbo_frame 35
- Show jumbo_frame 35
- Config serial_port 36
- Show serial_port 36
- Config bootrom password 37
- Enable clipaging 37
- Disable clipaging 38
- Enable web 38
- Disable web 39
- Enable autoconfig 39
- Config autoconfig 40
- Disable autoconfig 40
- Show autoconfig 40
- Disable auto learning 41
- Enable auto learning 41
- Reboot 42
- Logout 44
- Reload config config_id 44
- Traceroute 47
- Traceroute6 48
- Reset cpu port 49
- Show cpu port 49
- Disable telnet 50
- Enable telnet 50
- Telnet 50
- Config time_range 51
- Show tech support 52
- Show time_range 52
- Clear tech support 53
- Command parameter 54
- Disable smtp 54
- Enable smtp 54
- Smtp server commands 54
- Config smtp 55
- Show smtp 55
- Smtp sent_testmsg 56
- Command parameter 58
- Config command_prompt 58
- Modify banner and prompt commands 58
- Config greeting_message 59
- Show greeting_message 60
- Command parameter 61
- Config ddp 61
- Config ddp report 61
- Dlink discover protocol commands 61
- Config ddp report timer 62
- Command parameter 63
- Config ports 63
- Switch port commands 63
- Show ports 64
- Delete ports 65
- Command parameter 66
- Disable loopdetect 66
- Enable loopdetect 66
- Loopback detection commands 66
- Config loopdetect mode 67
- Config loopdetect ports 67
- Config loopdetect 68
- Show loopdetect 68
- Command parameter 70
- Config dos_prevention dos_type 70
- Dos prevention commands 70
- Show dos_prevention 71
- Disable dos_prevention trap_log 72
- Enable dos_prevention trap_log 72
- Command parameter 73
- Config pppoe circuit_id_insertion state 73
- Pppoe circuit id insertion commands 73
- Config pppoe circuit_id_insertion ports 74
- Show pppoe circuit_id_insertion 75
- Show pppoe circuit_id_insertion ports 75
- Command parameter 77
- Config filter dhcp_server 77
- Dhcp server screening commands 77
- Config filter dhcp_server 78
- Show filter dhcp_server 78
- Show dhcp_server screening 79
- Command parameter 80
- Ip mac port binding commands 80
- Command parameter 81
- Create address_binding ip_mac 81
- Config address_binding ip_mac log 82
- Config address_binding ip_mac ports 82
- Config address_binding auto_scan 83
- Show address_binding ip_mac log 83
- Config address_binding auto_scan ipv6address 84
- Delete address_binding 84
- Show address_binding 85
- Disable address_binding dhcp_snoop 86
- Enable address_binding dhcp_snoop 86
- Show address_binding auto_scan list 86
- Config address_binding dhcp_snoop max_entry ports 87
- Show address_binding dhcp_snoop 87
- Disable address_binding dhcp_pd_snoop 88
- Enable address_binding dhcp_pd_snoop 88
- Config address_binding vlan 89
- Show address_binding dhcp_pd_snoop 89
- Disable address_binding roaming 90
- Enable address_binding roaming 90
- Show address_binding roaming 90
- Clear address_binding dhcp_snoop binding_entry ports 91
- Command parameter 92
- Network management snmp commands 92
- Command parameter 93
- Command parameter 94
- Command parameter 95
- Create snmp user 95
- Delete snmp user 96
- Show snmp user 96
- Create snmp view 97
- Delete snmp view 97
- Create snmp community 98
- Show snmp view 98
- Delete snmp all_community 99
- Delete snmp community 99
- Config snmp engineid 100
- Show snmp community 100
- Enable community_encryption 101
- Show snmp engineid 101
- Disable community_encryption 102
- Show community_encryption 102
- Create snmp group 103
- Delete snmp group 104
- Show snmp global state 104
- Create snmp host 105
- Show snmp groups 105
- Delete snmp host 106
- Create snmp v6host 107
- Show snmp host 107
- Delete snmp v6host 108
- Enable trusted_host 109
- Show snmp v6host 109
- Create trusted_host 110
- Disable trusted_host 110
- Show trusted_host 111
- Delete trusted_host 112
- Enable snmp traps 112
- Disable snmp authenticate traps 113
- Disable snmp traps 113
- Enable snmp authenticate traps 113
- Enable snmp linkchange_traps 114
- Show snmp traps 114
- Config snmp linkchange_traps ports 115
- Disable snmp linkchange_traps 115
- Show snmp traps linkchange_traps 116
- Config snmp system_contact 117
- Config snmp system_location 117
- Config snmp system_name 117
- Config snmp coldstart_traps 118
- Config snmp warmstart_traps 118
- Disable snmp 119
- Enable snmp 119
- Enable snmp dhcp_ screening traps 119
- Disable snmp dhcp_ screening traps 120
- Disable snmp impb_violation traps 120
- Enable snmp impb_violation traps 120
- Disable snmp firmware_upgrade_state traps 121
- Enable snmp firmware_upgrade_state traps 121
- Disable snmp lbd traps 122
- Enable snmp lbd traps 122
- Enable snmp port_security_violation traps 122
- Disable snmp port_security_violation traps 123
- Enable snmp rstpport_state_change traps 123
- Disable snmp duplicate_ip_detected traps 124
- Disable snmp rstpport_state_change traps 124
- Enable snmp duplicate_ip_detected traps 124
- Command parameter 126
- Download 126
- Download upload commands 126
- Upload 127
- Config configuration config_id 128
- Show config 129
- Show firmware information 129
- Config firmware image_id 130
- Show boot_file 130
- Show flash information 131
- Command parameter 132
- Dhcp relay commands 132
- Command parameter 133
- Disable dhcp_relay 133
- Enable dhcp_relay 133
- Config dhcp_relay add ipif system 134
- Config dhcp_relay port 134
- Config dhcp_relay delete ipif system 135
- Config dhcp_relay hops 135
- Config dhcp_relay option_82 136
- Config dhcp_relay vlan 136
- Show dhcp_relay 137
- Enable dhcp_local_relay 138
- Config dhcp_local_relay port 139
- Disable dhcp_local_relay 139
- Config dhcp_local_relay vlan 140
- Show dhcp_local_relay 140
- Disable dhcpv6_relay 141
- Enable dhcpv6_relay 141
- Show dhcpv6_relay 141
- Config dhcpv6_relay 142
- Config dhcpv6_relay hop_count 143
- Config dhcpv6_relay option_18 143
- Config dhcpv6_relay option_37 144
- Config dhcpv6_relay option_38 144
- Show dhcpv6_relay option_38 145
- Command parameter 146
- Config gratuitous_arp send ipif_status_up 146
- Gratuitous arp commands 146
- Config gratuitous_arp learning 147
- Config gratuitous_arp send dup_ip_detected 147
- Disable gratuitous_arp 148
- Enable gratuitous_arp 148
- Config gratuitous_arp send periodically interval 149
- Show gratuitous_arp 149
- Command parameter 151
- Config power_saving 151
- Config power_saving mode 151
- Power saving commands 151
- Show power_saving 152
- Command parameter 153
- Cpu protection commands 153
- Disable cpu_protect 153
- Enable cpu_protect 153
- Config cpu_protect type 154
- Show cpu_protect 154
- Command parameter 156
- Network monitoring commands 156
- Show packet ports 156
- Show error ports 157
- Show utilization 158
- Clear counters 159
- Save log 159
- Clear log 160
- Enable syslog 160
- Show log 160
- Disable syslog 161
- Show syslog 161
- Create syslog host 162
- Config syslog host 164
- Delete syslog host 166
- Show syslog host 166
- Cable diagnostic port 167
- Config syslogintimeout 167
- Config sysgroupinterval 168
- Show log_software_module 168
- Command parameter 170
- Config poe ports 170
- Poe commands 170
- Config poe system 171
- Show poe ports 171
- Show poe system 172
- Command parameter 174
- Config stp 174
- Spanning tree commands 174
- Config stp ports 175
- Config stp fbpdu 177
- Config stp priority 177
- Config stp version 177
- Disable stp 178
- Enable stp 178
- Show stp 179
- Show stp ports 180
- Show stp instance 181
- Create stp instance_id 182
- Show stp mst_config_id 182
- Config stp instance_id 183
- Delete stp instance_id 183
- Config stp mst_config_id 184
- Config stp mst_ports 184
- Command parameter 186
- Create fdb 186
- Forwarding database commands 186
- Config multicast_fdb 187
- Create multicast_fdb 187
- Config fdb aging_time 188
- Delete multicast_fdb 188
- Delete fdb 189
- Enable flood_fdb 189
- Config flood_fdb 190
- Disable flood_fdb 190
- Show flood_fdb 190
- Clear flood_fdb 191
- Show multicast_fdb 191
- Show fdb 192
- Clear fdb 193
- Config multicast vlan_filtering_mode 193
- Create auto_fdb 194
- Delete auto_fdb 194
- Show auto_fdb 194
- Broadcast storm control commands 196
- Command parameter 196
- Config traffic control 196
- Config traffic trap 197
- Show traffic control 197
- Command parameter 199
- Disable password_recovery 199
- Enable password_recovery 199
- Password recovery commands 199
- Show password_recovery 200
- Command parameter 201
- Qos commands 201
- Command parameter 202
- Config scheduling 203
- Show scheduling 203
- Config bandwidth_control 204
- Config cos mac_mapping 205
- Show bandwidth_control 205
- Delete cos mac_mapping 206
- Show cos mac_mapping 206
- Config cos ip_mapping 207
- Delete cos ip_mapping 207
- Show cos ip_mapping 207
- Config cos ipv6_mapping 208
- Show cos ipv6_mapping 208
- Config cos ipv6_tc_mapping 209
- Delete cos ipv6_mapping 209
- Delete cos ipv6_tc_mapping 210
- Show cos ipv6_tc_mapping 210
- Config cos mapping 211
- Show cos mapping 211
- Config cos protocol_mapping 212
- Show cos protocol_mapping 212
- Config cos vlanid_mapping 213
- Delete cos protocol_mapping 213
- Show cos vlanid_mapping 213
- Config cos tos value 214
- Delete cos vlanid_mapping 214
- Config cos tcp_port_mapping 215
- Show cos tos 215
- Delete cos tcp_port_mapping 216
- Show cos tcp_port_mapping 216
- Config cos udp_port_mapping 217
- Show cos udp _port_mapping 217
- Config 802 p user_priority 218
- Delete cos udp_port_mapping 218
- Config 802 p default_priority 219
- Show 802 p user_priority 219
- Config scheduling_mechanism 220
- Show 802 p default_priority 220
- Show scheduling_mechanism 221
- Config dscp tos mode 222
- Config dscp_mapping 222
- Show dscp_mapping 223
- Command parameter 224
- Enable rmon 224
- Rmon commands 224
- Create rmon alarm 225
- Disable rmon 225
- Delete rmon alarm 226
- Show rmon alarm 226
- Create rmon collection stats 227
- Create rmon collection history 228
- Delete rmon collection stats 228
- Create rmon event 229
- Delete rmon collection history 229
- Delete rmon event 230
- Show rmon 230
- Show rmon statistics 230
- Command parameter 232
- Disable mirror 232
- Enable mirror 232
- Port mirroring commands 232
- Config mirror target 233
- Show mirror 234
- Command parameter 235
- Vlan commands 235
- Command parameter 236
- Create vlan 236
- Config vlan 237
- Delete vlan 237
- Config gvrp 238
- Config gvrp timer 238
- Disable gvrp 239
- Enable gvrp 239
- Create dot1v_protocol_group 240
- Show vlan 240
- Config dot1v_protocol_group 241
- Delete dot1v_protocol_group 241
- Config port dot1v ports all 242
- Show dot1v_protocol_group 242
- Show port dot1v 243
- Show gvrp 244
- Show gvrp timer 244
- Disable vlan_trunk 245
- Enable vlan_trunk 245
- Show vlan_trunk 245
- Config vlan_trunk ports 246
- Enable asymmetric_vlan 246
- Disable asymmetric_vlan 247
- Enable pvid auto_assign 247
- Show asymmetric_vlan 247
- Disalbe pvid auto_assign 248
- Show pvid auto_assign 248
- Create mac_based_vlan mac address 249
- Deleete mac_based_vlan mac address 249
- Config vlan_auto_learn 250
- Show mac_based_vlan mac address 250
- Show vlan_auto_learn 251
- Command parameter 252
- Mac based access control commands 252
- Config mac_based_access_control password 253
- Disable mac_based_access_control 253
- Enable mac_based_access_control 253
- Config mac_based_access_control method 254
- Config mac_based_access_control port 254
- Config mac_based_access_control log state 255
- Config mac_based_access_control trap state 255
- Config mac_based_access_control log max_users 256
- Create mac_based_access_control_local mac_address 256
- Show mac_based_access_control 257
- Show mac_based_access_control_local 257
- Delete mac_based_access_control_local 258
- Show mac_based_access_control auth_state ports 258
- Command parameter 260
- Enable wac 260
- Web based access control commands 260
- Config wac default_redirpath 261
- Disable wac 261
- Config wac method 262
- Config wac ports 262
- Config wac switch_http_port 263
- Config wac virtual_ip 263
- Create wac user 264
- Delete wac user 264
- Show wac 265
- Show wac user 265
- Show wac ports 266
- Show wac auth_state ports 267
- Command parameter 268
- Enable qinq 268
- Q in q commands 268
- Disable qinq 269
- Show qinq 269
- Config qinq inner_tpid 270
- Config qinq ports 270
- Create vlan_translation 271
- Show vlan_translation 271
- Delete vlan_translation ports 272
- Command parameter 273
- Create link_aggregation 273
- Link aggregation commands 273
- Config link_aggregation group_id 274
- Delete link_aggregation 274
- Config link_aggregation algorithm 275
- Config link_aggregation state 275
- Show link_aggregation 276
- Basic ip commands 277
- Command parameter 277
- Create ipif 277
- Delete ipif 278
- Disable ipif 278
- Enable ipif 278
- Config ipif 279
- Bpdu attack protection commands 281
- Command parameter 281
- Config bpdu_protection ports 281
- Config bpdu_protection recovery_timer 282
- Config bpdu_protection 283
- Enable bpdu_protection 283
- Disable bpdu_protection 284
- Show bpdu_protection 284
- Command parameter 286
- Config ethernet_oam ports 286
- Ethernet oam commands 286
- Config ethernet_oam ports 287
- Show ethernet_oam ports 288
- Show ethernet_oam ports 289
- Show ethernet_oam ports 290
- Show ethernet_oam ports 291
- Clear ethernet_oam ports 292
- Command parameter 293
- Disable mac_notification 293
- Enable mac_notification 293
- Mac notification commands 293
- Config mac_notification 294
- Config mac_notification ports 294
- Show mac_notification 295
- Show mac_notification ports 295
- Command parameter 297
- Igmp snooping commands 297
- Command parameter 298
- Config igmp_snooping 298
- Config igmp_snooping querier 299
- Create igmp_snooping multicast_vlan 299
- Config igmp_snooping multicast_vlan 300
- Config igmp_snooping multicast_vlan_group 301
- Delete igmp_snooping multicast_vlan 301
- Clear igmp_snooping data_driven_group 302
- Config igmp_snooping data_driven_learning 302
- Config router_ports 303
- Config router_ports_forbidden 303
- Config igmp access_authentication ports 304
- Show igmp access_authentication ports 304
- Disable igmp_snooping 305
- Enable igmp_snooping 305
- Show igmp_snooping 306
- Show igmp_snooping forwarding 307
- Show igmp_snooping group 307
- Show igmp_snooping host 308
- Show igmp_snooping multicast_vlan 308
- Show igmp_snooping multicast_vlan_group 309
- Show router_ports 309
- Command parameter 311
- Disable l2protocol_tunnel 311
- Enable l2protocol_tunnel 311
- Layer 2 protocol tunneling commands 311
- Config l2protocol_tunnel ports 312
- Show l2protocol_tunnel 312
- Command parameter 314
- Config ddm ports 314
- Digital diagnostic monitoring commands 314
- Config ddm power_unit 315
- Show ddm ports 315
- Command parameter 317
- Mld snooping commands 317
- Command parameter 318
- Disable mld_snooping 318
- Enable mld_snooping 318
- Config mld_snooping 319
- Create mld_snooping multicast_vlan 319
- Config mld_snooping multicast_vlan 320
- Delete mld_snooping multicast_vlan 321
- Show mld_snooping multicast_vlan 321
- Config mld_snooping multicast_vlan_group 322
- Show mld_snooping multicast_vlan_group 322
- Config mld_snooping mrouter_ports 323
- Config mld_snooping mrouter_ports_forbidden 323
- Config mld_snooping querier 324
- Config mld_snooping data_driven_learning 325
- Clear mld_snooping data_driven_group 326
- Show mld_snooping 326
- Show mld_snooping forwarding 327
- Show mld_snooping group 328
- Show mld_snooping mrouter_ports 328
- Show mld_snooping host 329
- Command parameter 330
- Create mcast_filter_profile 330
- Limited ip multicast address commands 330
- Config mcast_filter_profile profile_id 331
- Config mcast_filter_profile profile_name 331
- Config mcast_filter_profile ipv6 332
- Delete mcast_filter_profile 332
- Show mcast_filter_profile 333
- Config limited_multicast_addr 334
- Show limited_multicast_addr 334
- Config max_mcast_group 335
- Show max_mcast_group 335
- Command parameter 337
- X commands 337
- Command parameter 338
- Disable 802 x 338
- Enable 802 x 338
- Show 802 x 339
- Show 802 x auth_state 339
- Show 802 x auth_configuration 340
- Config 802 x auth_parameter ports 341
- Config 802 x init 342
- Config 802 x auth_protocol 343
- Config 802 x reauth 343
- Config radius add 344
- Config radius delete 344
- Config radius 345
- Config 802 x fwd_pdu system 346
- Show radius 346
- Config 802 x auth_mode 347
- Show 802 x fwd_pdu system status 347
- Create 802 x guest_vlan 348
- Delete 802 x guest_vlan 348
- Config 802 x guest_vlan ports 349
- Show 802 x guest_vlan 349
- Create 802 x user 350
- Show 802 x user 350
- Config 802 x capability ports 351
- Delete 802 x user 351
- Command parameter 353
- Config port_security 353
- Port security commands 353
- Show port_security 354
- Delete port_security _entry 355
- Command parameter 356
- Config sntp 356
- Time and sntp commands 356
- Enable sntp 357
- Show sntp 357
- Config time 358
- Disable sntp 358
- Config dst 359
- Config time_zone operator 359
- Show time 360
- Arp commands 362
- Command parameter 362
- Create arpspoofing 362
- Delete arpspoofing 363
- Show arpspoofing 363
- Clear arptable 364
- Config arp_aging time 364
- Config arpentry 365
- Create arpentry 365
- Delete arpentry 366
- Show arpentry 366
- Show arpentry aging_time 367
- Command parameter 368
- Create iproute 368
- Routing table commands 368
- Delete iproute 369
- Show iproute 369
- Command parameter 370
- Commands 370
- Config duld ports 370
- D link unidirectional link detection duld 370
- Config duld recover_timer 371
- Show duld ports 371
- Show duld recover_timer 372
- Command parameter 373
- Create ipv6 neighbor_cache 373
- Ipv6 neighbor discovery commands 373
- Delete ipv6 neighbor_cache 374
- Show ipv6 neighbor_cache 374
- Config ipv6 nd ns ipif 375
- Show ipv6 nd 375
- Create ipv6route default 376
- Delete ipv6route default 376
- Enable ipif_ipv6_link_local_auto 377
- Show ipv6route 377
- Disable ipif_ipv6_link_local_auto 378
- Banner commands 379
- Command parameter 379
- Config log_save_timing 379
- Show log 380
- Show log_save_timing 380
- Command history list commands 381
- Command parameter 381
- Show command_history 382
- Command logging commands 384
- Command parameter 384
- Disable command logging 384
- Enable command logging 384
- Show command logging 385
- Command parameter 386
- Enable ssh 386
- Ssh commands 386
- Config ssh algorithm 387
- Disable ssh 387
- Config ssh authmode 388
- Show ssh authmode 388
- Config ssh server 389
- Show ssh server 389
- Config ssh user 390
- Show ssh algorithm 390
- Show ssh user authmode 391
- Command parameter 392
- Enable ssl 392
- Ssl commands 392
- Disable ssl 393
- Show ssl 393
- Download ssl certificate 394
- Access authentication control commands 395
- Command parameter 395
- Command parameter 396
- Create authen_login method_list_name 396
- Config authen_login 397
- Delete authen_login method_list_name 398
- Show authen_login 398
- Show authen_policy 399
- Config authen_enable 400
- Create authen_enable method_list_name 400
- Delete authen_enable method_list_name 402
- Show authen_enable 402
- Disable authen_policy 403
- Enable authen_policy 403
- Config authen application 404
- Show authen application 404
- Config authen parameter 405
- Create authen server_host 406
- Show authen parameter 406
- Config authen server_host 407
- Delete authen server_host 408
- Show authen server_host 409
- Config authen server_group 410
- Create authen server_group 410
- Delete authen server_group 411
- Show authen server_group 411
- Enable admin 412
- Config accounting 413
- Config admin local_enable 413
- Config accounting service 414
- Config accounting service command 415
- Create accounting method_list_name 415
- Delete accounting method_list_name 416
- Show accounting method_list_name 416
- Disable aaa_server_password_encryption 417
- Enable aaa_server_password_encryption 417
- Show aaa 418
- Command parameter 419
- Config eee port 419
- Energy efficient ethernet commands 419
- Show eee_mode port 419
- Command parameter 421
- Config lacp port_priority 421
- Lacp commands 421
- Show lacp 421
- Config lacp_ports 422
- Command parameter 424
- Lldp commands 424
- Config lldp message_tx_interval 425
- Disable lldp 425
- Enable lldp 425
- Config lldp message_tx_hold_multiplier 426
- Config lldp reinit_delay 426
- Config lldp notification_interval 427
- Config lldp tx_delay 427
- Show lldp 427
- Show lldp ports 428
- Show lldp local_ports 429
- Config lldp ports 430
- Show lldp remote_ports 430
- Config lldp ports 431
- Config lldp ports 432
- Config lldp ports 433
- Show lldp mgt_addr 434
- Show lldp statistics 434
- Show lldp power_pse_tlv 435
- Access control list commands 436
- Command parameter 436
- Command parameter 437
- Create access_profile 437
- Config access_profile 439
- Delete access_profile 443
- Show access_profile 443
- Create cpu_access_profile 444
- Config cpu_access_profile 445
- Delete cpu_access_profile 447
- Config flow_meter profile_id 448
- Show cpu_access_profile 448
- Show flow_meter 449
- Command parameter 450
- Config traffic_segmentation 450
- Show traffic_segmentation 450
- Traffic segmentation commands 450
- Command parameter 452
- Config safeguard_engine 452
- Safeguard commands 452
- Show safeguard_engine 452
- Device specifications 454
- Technical specifications 454
- Supported transceivers 457
Похожие устройства
- D-Link DGS-1210-52MPP/ME Краткое руководство по установке
- D-Link DGS-1210-52P/ME Краткое руководство по установке
- D-Link DGS-1510-10L/ME Руководство пользователя _Web UI_
- D-Link DGS-1510-10L/ME Руководство пользователя _CLI_
- D-Link DGS-1510-10L/ME Руководство по установке
- D-Link DGS-1510-10L/ME Краткое руководство по установке
- D-Link DGS-1510-28LP/ME Руководство по установке
- D-Link DGS-1510-28LP/ME Руководство пользователя _CLI_
- D-Link DGS-1510-28LP/ME Краткое руководство по установке
- D-Link DGS-1510-28LP/ME Руководство пользователя _Web UI_
- D-Link DGS-1510-28XMP/ME Руководство пользователя _CLI_
- D-Link DGS-1510-28XMP/ME Руководство пользователя _Web UI_
- D-Link DGS-1510-28XMP/ME Руководство по установке
- D-Link DGS-1510-28XMP/ME Краткое руководство по установке
- D-Link DGS-1510-52L/ME Руководство по установке
- D-Link DGS-1510-52L/ME Руководство пользователя _CLI_
- D-Link DGS-1510-52L/ME Руководство пользователя _Web UI_
- D-Link DGS-1510-52L/ME Краткое руководство по установке
- D-Link DGS-1510-52X/ME Руководство по установке
- D-Link DGS-1510-52X/ME Руководство пользователя _CLI_