D-Link DGS-1210-52/ME rev.A [298/457] Command parameter
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

D-Link DGS-1210-52/ME rev.A [298/457] Command parameter

D-Link DGS-1210-52/ME rev.A [298/457] Command parameter
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
280
Command
Parameter
show igmp_snooping
group
[vlan <vlan_name 32> | vlanid <vidlist>] <ipaddr> {data_driven}
show igmp_snooping
forwarding
{vlan <vlan_name 32> | vlanid <vidlist>}
show igmp_snooping
host
{ports <portlist> | group <ipaddr> | vlan <vlan_name 32> | vlanid <vidlist>}
show igmp_snooping
multicast_vlan
{<vlan_name 32>}
show igmp_snooping
multicast_vlan_group
{<vlan_name 32>}
show router_port
{vlan <vlan_name 32> | vlanid <vidlist> | static | dynamic | forbidden}
Each command is listed in detail, as follows:
config igmp_snooping
Purpose
To configure IGMP snooping on the Switch.
Syntax
config igmp_snooping [vlan_name <string 32> | vlanid <vidlist>
| all] [host_timeout <sec 130-153025> | router_timeout <sec 60-
600> | leave_timer <sec 1-25> | fast_leave [enable | disable] | |
report_suppression [enable | disable] | state [enable | disable]]
Description
The config igmp_snooping command configures IGMP snooping
on the Switch.
Parameters
vlan_name <string 32> − The name of the VLAN for which IGMP
snooping is to be configured.
vlanid <vidlist> − The VLAN id for which IGMP snooping is to be
configured.
all − Specifies all VLAN for which IGMP snooping is to be
configured.
host_timeout <sec 130-153025> − Specifies the maximum amount
of time a host can be a member of a multicast group without the
Switch receiving a host membership report. The default is 260
seconds.
router_timeout <sec 60-600> − Specifies the maximum amount of
time a route can be a member of a multicast group without the
Switch receiving a host membership report.
leave_timer <sec 1-25> − Leave timer. The default is 10 seconds.
fast_leave [enable | disable] − Enables or disables the fast leave.
state [enable | disable] − Enables or disables IGMP snooping for the
specified VLAN.
Restrictions
Only administrator, operator or power user-level users can issue this
command.
Example usage:
To configure the igmp snooping:
DGS-1210-28P/ME:5# config igmp_snooping vlanid 2 fast_leave enable
host_timeout 130 leave_timer 2 report_suppression disable router_timeout 60
state enable

Содержание

Похожие устройства

Скачать