Qtech QSW-8200-28T-AC-DC [24/74] Ip route vrf

User Manual

Chapter 2. Commands for Static Route 24

www.qtech.ru

 Switch(config)#ip route 1.1.1.0 255.255.255.0 2.1.1.1

 Example 2. Add default route

 Switch(config)#ip route 0.0.0.0 0.0.0.0 2.2.2.1

2.2 ip route vrf

This command is supported by this switch.

2.3 show ip route

 Command: show ip route [<destination>|<destination >|<length>|connected | static

bgp | isis| kernel] |fib[statistics]]

 Function: Show the route table.

 Parameter: <destination> is the destination network address; <destination >/<length>

is the destination network address plus the length of prefix; connected is direct route;

static is static route; rip is RIP route; ospf is OSPF route; bgp is BGP route; isis is ISIS

route; kernel is kernel route; statistics shows the number of routes; database is route

database; fib is kernel route table.

 Command Mode: All modes

 Usage Guide: Show all the contents in the route table including: route type, destination

network, mask, next-hop address, interface, etc

 Example: switch#show ip route

 Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP

 - OSPF, IA - OSPF inter area

 N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

 E1 - OSPF external type 1, E2 - OSPF external type 2

 i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area

 - candidate default

 Gateway of last resort is 210.0.0.3 to network 0.0.0.0

 S* 0.0.0.0/0 [1/0] via 210.0.0.3, Vlan1

C 127.0.0.0/8 is directly connected, Loopback

O IA 172.16.11.0/24 [110/40] via 210.14.0.1, Vlan3014, 00:00:47

O IA 172.16.12.0/24 [110/40] via 210.14.0.1, Vlan3014, 00:00:47

O IA 172.16.13.0/24 [110/40] via 210.14.0.1, Vlan3014, 00:00:47

O IA 172.16.14.0/24 [110/40] via 210.14.0.1, Vlan3014, 00:00:47

O IA 172.16.15.0/24 [110/50] via 210.14.0.1, Vlan3014, 00:00:47

O E2 172.16.100.0/24 [110/0] via 210.14.0.1, Vlan3014, 00:00:46

Displayed information

Explanation

C –connected

Direct route, namely the segment