Qtech QSW-8200-28T-AC-DC [39/74] Offset list

User Manual

Chapter 3. Commands for RIP 39

www.qtech.ru

 Switch(config)# router rip

 Switch(config-router)# network 10.0.0.0/8

 Switch(config-router)# network vlan 1

 Related Command: show ip rip, clear ip rip

3.28 offset-list

 Command: offset-list <access-list-number |access-list-name> {in|out} <number >

[<ifname>]

 no offset-list <access-list-number |access-list-name> {in|out} <number > [<ifname>]

 Function: Add an offset value to the metric value of the routes learnt by RIP. The “no

offset-list <access-list-number |access-list-name> {in|out} <number > [<ifname>]”

command disables this function.

 Parameter: < access-list-number |access-list-name> is the access-list or name to be

applied. <number > is the added offset value, ranging between 0-16; <ifname> is the

specific interface name

 Default: Default offset value is the metric value defined by the system.

 Command Mode: Router mode and address-family mode

 Example: Switch# config terminal

 Switch(config)# router rip

 Switch(config-router)# offset-list 1 in 5 vlan 1

 Related Command: access-list

3.29 passive-interface

 Command: passive-interface <ifname>

 no passive-interface <ifname>

 Function: Set the RIP layer 3 switch blocks RIP broadcast on specified interface, on

which the RIP data packets will only be sent to layer 3 switches configured with

neighbor.

 Parameter: <ifname> is the name of specific interface.

 Default: Not configured

 Command Mode: Router mode

 Example: Switch# config terminal

 Switch(config)# router rip

 Switch(config-router)# passive-interface vlan 1