Qtech QSW-8200-28T-AC-DC [40/74] Recv buffer size

User Manual

Chapter 3. Commands for RIP 40

www.qtech.ru

 Related Command: show ip rip

3.30 recv-buffer-size

 Command: recv-buffer-size<size>

 no recv-buffer-size

 Function: This command configures the size of UDP receiving buffer zone of RIP; the

“no recv-buffer-size” command restores the system default.

 Parameter: <size> is the buffer zone size in bytes, ranging between 8192-2147483647.

 Default: 8192 bytes.

 Command Mode: Router mode

 Example: Switch# config terminal

 Switch(config)# router rip

 Switch(config-router)# recv-buffer-size 23456789

3.31 redistribute

 Command: redistribute {kernel |connected| static| ospf [<process-id>] | isis| bgp}

[metric<value>] [route-map<word>]

 no redistribute {kernel |connected| static| ospf [<process-id>] | isis| bgp}

[metric<value>] [route-map<word>]

 Function: Introduce the routes learnt from other routing protocols into RIP.

 Parameter: kernel introduce from kernel routes;

 connected introduce from direct routes;

 static introduce from static routes;

 ospf introduce from OSPF routes. process-id is OSPF process ID, if there is no parameter

that means the process by default, range between 1 to 65535;

 isis introduce from ISIS routes;

 bgp introduce from BGP routes;

 <value> is the metric value assigned to the introduced route, ranging between 0 to 16;

 <word> is the probe pointing to the route map for introducing routes.

 Command Mode: Router Mode and address-family Mode

 Usage Guide: Under the address-family mode, the parameter kernel and ISIS is

unavailable.

 Example:

 Switch# config terminal