Qtech QSW-8200-28T-AC-DC [41/74] Redistribute ospf vrf command

User Manual

Chapter 3. Commands for RIP 41

www.qtech.ru

 Switch(config)# router rip

 Switch(config-router)# redistribute kernel route-map ipi

 To redistribute OSPFv2 routing information to RIP.

 Switch(config)# router rip

 Switch(config-router)# redistribute ospf 2

3.32 redistribute ospf (vrf command)

 This command is not supported by the switch.

3.33 route

 Command: route <A.B.C.D/M>

 no route <A.B.C.D/M>

 Function: This command configures a static RIP route. The “no route <A.B.C.D/M>”

command deletes this route.

 Parameter: Specifies this destination IP address prefix and its length.

 Command Mode: Router mode

 Usage Guide: The command adds a static RIP route, and is mainly used for debugging.

Routes configured by this command will not appear in kernel route table but in the RIP

route database.

 Example: Switch# config terminal

 Switch(config)# router rip

 Switch(config-router)# route 1.0.0.0/8

3.34 router rip

 Command: router rip

 no router rip

 Function: Enable the RIP routing process and enter the RIP mode; the “no router rip”

command closes the RIP routing protocol.

 Default: Not running RIP route.

 Command Mode: Global mode

 Usage Guide: This command is the switch for starting the RIP routing protocol which is

required to be open before configuring other RIP protocol commands.

 Example: Enable the RIP protocol mode