Qtech QSW-8200-28T-AC-DC [50/74] Default metric

User Manual

Chapter 4. Commands for RIPng 50

www.qtech.ru

 Switch(config-router)#default-information originate

4.3 default-metric

 Command: default-metric <value>

 no default-metric

 Function: Set the default metric route value of the introduced route; the “no default-

metric” restores the default value.

 Parameter: <value> is the route metric value to be set, ranging between 1～16.

 Default: Default route metric value is 1.

 Command Mode: Router mode

 Usage Guide: default-metric command is used for setting the default route metric value

of the routes from other routing protocols when distributed into the RIPng routes.

When using the redistribute commands for introducing routes from other protocols,

the default route metric value specified by default-metric will be adopted if no specific

route metric value is set.

 Example: Set the default route metric value of the routes from other routing protocols

when distributed into the RIPng routes as 3.

 Switch(config-router)#default-metric 3

 Related Command: redistribute

4.4 distance

 Command: distance <number> [<ipv6-address>] [<access-list-name | access-list-

number>]

 no distance [<ipv6-address>]

 Function: Set the managing distance with this command. The “no distance

[<A.B.C.D/M> ]” command restores the default value to 120.

 Parameter: <number> specifies the distance value, ranging between 1-255. <ipv6-

address> is the local link address or its prefix. <access-list-name|access-list-number>

specifies the access-list number or name applied.

 Default: The default managing distance of RIP is 120.

 Command Mode: Router mode and address-family mode.

 Usage Guide: In case there are routes from two different routing protocols to the same

destination, the managing distance is then used for selecting routes. The less the

managing distance of the route protocol is, the more reliable will be the route acquired